Buying malts for my first batch ("All Amarillo APA")

Post #1 made 12 years ago
Hi again

I'm convinced that I'll want to do a BIAB as my very first brew, and the "AAA"- recipe seems perfect. I would just need a bit of help with choosing (ordering) the right malts. I'm from Finland, and we have a local malt factory "Viking Malt", it would be cheapest to use their products.

The recipe calls for:
-5kg's of JW Traditional Ale EBC 6.2. Would Pale Ale EBC 5, or Vienna EBC 7 be appropriate?
-1kg of Munich 1 EBC 17.7. That's exactly what Viking Malt lists as well.
-500g CaraAmber EBC 94. There's Crystal 100 EBC; is that OK?

BTW it's really nice that most of this BIAB-stuff is in metric and EBC's, doesn't have to convert all the time!

Thanks in advance!
"The rules for making hop additions during the boil are about as well defined as those for a knife fight." -Stan Hieronymus

Post #3 made 12 years ago
Welcome to the forum onke,,

One of the confusing things about brewing is we read recipes and they can be presented in a way where you buy so many grams of grain and you will get this much beer. But, that is not the right way. Any recipe needs to be adjusted to suit your equipment and how much beer you want.

I know the recipe you are talking about like the back of my hand. Your malt assumptions above are excellent (except forget the Vienna) but I am worried that you are not using the BIABacus correctly.

I think you should post the file here that you have been looking at but make sure you have filled in Section B of that BIABacus file. (Lots of files are floating about. Posting your file is the easiest way of ensuring there is no misinterpretation.)

:peace:
PP

[TS14}
If you have found the above or anything else of value on BIABrewer.info, consider supporting us by getting some BIPs!
    • SVA Brewer With Over 100 Brews From Australia

Post #5 made 12 years ago
onkeltuka - NRB's All AMarillo APA - Batch 1(1).xls
ok, here we go. The kettle has a rounded bottom, so I think the total capacity is little less than what the BIABicus calculates.
You do not have the required permissions to view the files attached to this post.
Last edited by onkeltuka on 29 Jul 2014, 00:42, edited 1 time in total.
"The rules for making hop additions during the boil are about as well defined as those for a knife fight." -Stan Hieronymus

Post #6 made 12 years ago
Which amount should I add to my kettle initially, is it the TWN or SWN? (and what's the difference?) Also, I have access to WhiteLabs liquid yeasts, is "WLP060 American Ale Blend Yeast", or "WLP001 California Ale Yeast" ok? If I make a starter out of that, what size should it be? 1,5 liters?

I'm going to go by some of that "Voile"- stuff and try to make a "truncated cone"- bag.
"The rules for making hop additions during the boil are about as well defined as those for a knife fight." -Stan Hieronymus

Post #7 made 12 years ago
Depends on your equipment
If you are adding cold water and then heating it up in your mash tun go with TWN. If adding the the water to your mash at strike temp then add SWN. Its based on water expanding when heated and contracting when cooling.... marginally.
With the yeast if you are going to use the yeast once and then make a different style beer then i wouldnt bother with the starter. Personally i do starters when i have a big beer to ferment or a slightly older yeast pack or i wanna keep some of the yeast for the next beer. If you get a fresh liquid yeast pack it will ferment out a 23L batch easily.

Post #8 made 12 years ago
onkeltuka wrote:
ok, here we go. The kettle has a rounded bottom, so I think the total capacity is little less than what the BIABicus calculates.
To get an accurate kettle capacity, you can follow this help; http://www.biabrewer.info/viewtopic.php" onclick="window.open(this.href);return false; ... 912#p25939

Your kettle height in Section B will be the height measured from the center of the rounded bottom to the top. In Section X you then enter the two measurements for the volume and height (as shown in the sunken base diagram).
Last edited by Mad_Scientist on 31 Jul 2014, 07:55, edited 1 time in total.
    • SVA Brewer With Over 100 Brews From United States of America

Post #9 made 12 years ago
Thanks guys!

We did a test fire yesterday with the kettle and a gas burner, and it took a whopping 2.5 hours to get 50-liters boiling! It was a pretty much open flame, so I thought we have to build something to contain the fire better, maybe that'll help. I was also looking at some bigger burners at the internet, but am so broke right now that this rig will have to do it for the first batch...
"The rules for making hop additions during the boil are about as well defined as those for a knife fight." -Stan Hieronymus

Post #10 made 12 years ago
oh, and my supplier was all out of Amarillo, so this'll be the "All Cascade APA". Hope it won't matter too much. The AA- rating was almost the same.
"The rules for making hop additions during the boil are about as well defined as those for a knife fight." -Stan Hieronymus
Post Reply

Return to “BIABrewer.info and BIAB for New Members”

Brewers Online

Brewers browsing this forum: No members and 207 guests

cron