Display posts from previous
Sort by

Brew ABA wosit

Post #5 made 9 years ago
by Contrarian
It looks complicated at first glance but you really don't need to enter a lot of information to get all the info you need out of it.

Start with your pot dimensions and desired Volume Into Fermenter.

Then put a recipe in, I find the easiest way to do this is to add the percentage of each grain on the left but you can also put weights if that is how you have your recipe. Add your target gravity and you're away.

The only other thing you need is your hops but this is the same as the grain. You need to know the AA% and what time you will add them as well as your target IBU at the top.

That is all the info you need to enter to complete a brew, there's lots of other things you can do but none are necessary.

In the water volume sections it will have calculated your starting water in volume or cm in your pot so whatever is easiest to measure for you.

Have a look at a completed recipe or spend 15 minutes punching a recipe in and you will realize it is much more simple than it looks at first glance.
Post Reply

Return to “BIABrewer.info and BIAB for New Members”

Brewers Online

Brewers browsing this forum: No members and 52 guests