I have about 10 extract brews under my belt, and have fermentation under control finally.
I'm attempting this (low fidelity) recipe, http://byo.com/stories/item/1564-vienna-lager-in-exile, which I'm hoping is a bit like Dos Equis Special Lager (green bottle).
It's a traditional all grain recipe, so I don't quite understand the mash temps/timing. Also, it appears my 8.5 gallon kettle might be a bit too small for this batch so I might have to break out my old aluminum 60 quart kettle. I attempted a mini-mash with "double crushed" grain from my LHBS and achieved 70% efficiency, so with my new mill set at the appropriate width I hope to achieve near 75% with a full-volume no sparge method.Double Crossed
(Mexican Vienna Lager)
(5 gallons/19 L, all-grain)
OG = 1.044 FG = 1.009
IBU = 21 SRM = 10 ABV = 4.5%
Ingredients
5.0 lbs. (2.3 kg) Breiss Vienna malt
2 lb. 14 oz. (1.3 kg) Briess Pilsen malt
2.0 lbs. (0.91 kg) flaked maize
0.33 lbs. (0.15 kg) crystal malt (60 °L)
5.5 AAU Mt. Hood hops (60 mins) (1.1 oz./31 g of 5% alpha acids)
1 tsp. Irish moss (15 mins)
1/4 tsp yeast nutrients (15 mins)
Wyeast 2042 (Danish Lager), White Labs WLP850 (Copenhagen Lager) or White Labs WLP940 (Mexican Lager) yeast (3 qt./~3 L starter)
1 cup corn sugar (for priming)
Step by Step
In your kettle, heat 3 gallons (11 L) of water to 142 °F (61 °C), stir in grains and rest for 15 minutes at 131 °F (55 °C). Heat mash to 148 °F (64 °C) for a 30-minute rest then heat to 160 °F (71 °C) for a 15-minute rest. Heat to 170 °F (77 °C) and transfer to lauter tun. Collect about 5.5 gallons (21 L) of wort, add 1 gallon (3.8 L) of water and boil for 90 minutes, adding hops, Irish moss and yeast nutrients at times indicated in ingredient list. Cool wort to 56 °F (13 °C), transfer to fermenter and aerate. Pitch yeast from (cooled) yeast starter. Ferment at 56 °F (13 °C). Lager for 2 months at 40 °F (4.4 °C) or below.
Can anyone critique my BIABACUS attempt? I think I just need some help with the mash timing/temps.
Thanks in advance!