Best eBIAB pot

Post #1 made 12 years ago
Greetings from the Land of Lincoln!!

So I am new here and I would make my virgin post. I am eager to start my first BIAB, but I have a newbie question.
I am in the market for a BIAB pot and I am not sure which one to get. There are some requirements I would like to include. I am looking for an 80, 82, or a 100 quart pot. That’s at least 75 liters I think. I have looked at the bayou, classic 82 quart pot with the basket for about 175 usd but I was having second thoughts on it. The first issue was that I think there might not be enough room in the basket to put feet on, so as to increase the height 3 or 4 inches. Another poster on another board had this very same problem. Also I hear that the stainless on this pot is a bit thin, less than one millimeter.
I am also looking at this site http://www.kitchenfantasy.com/shopping_ ... kpots.html and was interested in the 75 quart pot. The price is right, however, with shipping it would bring it to about 215 usd and its only 75 quarts. I really want to get a bit bigger pot to make the big beers in the big pots (I am thinking about 10 gallons of >1.080 beer, at least). Also it’s nice to have that option.

Another option would be to simply buy an Update International pot. http://www.amazon.com/Update-Internatio ... stock+pots It does not have the steamer but I also found this one for a small price http://www.amazon.com/Update-Internatio ... 8BU2BUQ7B1. The problem with this option is that I am not sure about making beer with chrome, or how strong this steamer is for 50 pounds of grain in the stockpot.
Or , I could just by a commercial stock pot like the one here http://www.webstaurantstore.com/2737/st ... price_desc and make my own false bottom, just to have something off the stock pot so the bag won’t break. I also know about putting a plate or a pie tin upside down in the pot, but for me I am also thinking about going electric, thus the reason for having something that does have about a 3 or 4 inch clearance on the bottom.
Lastly I could go with the Bayou Classic pot like this one shown here http://www.amazon.com/Bayou-Classic-108 ... l+Stockpot Its suppose to be a bit more thicker but it does not come with a steamer. On the bayou website http://bayouclassicdepot.com/1982-bayou ... basket.htm is the steamer and it’s a nice one IMHO, but its also pricey at over 100 usd. Or does someone on this site know of another option.
So the question is what option would be best given that I want something with a steamer or a false bottom type of accessory, and is somewhat large (80 quarts or bigger)
I hope to hear from someone that has a pot similar to what my I am looking for.

Edit: Great site! :clap: :thumbs:
Last edited by johns on 01 Feb 2013, 00:06, edited 1 time in total.

Post #2 made 12 years ago
Great first post Johns.

Unfortunately i don't think i can help. I am from the UK, and we don't have such a dazzling array of choice when it comes to pots (great links by the way).

The only thing i would say is that having done numerous BIAB brews; If i were given a pot with basket and rack/stand/false bottom. They would gather dust in a corner! All i need is a pot, heat source, voile bag, & a hoist.
Are you planning to use it for something other than beer?
G B
I spent lots of money on booze, birds and fast cars. The rest I squandered
I've stopped drinking, but only when I'm asleep
I ONCE gave up women and alcohol - it was the worst 20 minutes of my life
    • SVA Brewer With Over 100 Brews From Great Britain

Post #4 made 12 years ago
johns,

I bought a keg and converted it. (cut a hole in the top) It could hold 15.5 gallons if I wanted to fill it all the way. I normally just brew 5 gal.(19 liter) batches. Sometime I brew a 10 gallon whopper but that is rare. I like to try everything or tweak a favorite? It will cost you about $35 dollars if you buy a empty one from a beer outlet? It may not be exactly cricket so let your conscious be your guide? I lost my conscious in Vietnam so it was OK with me!

http://www.stempski.com/biab.php
Last edited by BobBrews on 01 Feb 2013, 00:14, edited 2 times in total.
tap 1 Raspberry wine
tap 2 Bourbon Barrel Porter
tap 3 Czech Pilsner
tap 4 Triple IPA 11% ABV

Pipeline: Mulled Cider 10% ABV

http://cheesestradamus.com/ Brewers challenge!
    • SVA Brewer With Over 100 Brews From United States of America

Post #5 made 12 years ago
I'm with BobBrews, you can find a used 15.5 gallon keg and convert it for cheap. I bought 2 for $40 usd. I had a beer club buddy cut my top off. I drilled my three holes for my add-ons myself. DIY is fun and rewarding. You can look at my keg conversion, link below.

No basket or tray is really needed with a good technique!
    • SVA Brewer With Over 100 Brews From United States of America

Post #6 made 12 years ago
thanks for everyones responce. I am still debating it in my brain. Not sure about aluminum, and I think a keggle might be too small. the bigger the pot, the bigger the grain bill. I have though narroed it down to 2 pots and they are...http://www.ebay.com/itm/80-Qt-Quart-20- ... 22596#shId and http://www.amazon.com/Concord-Quart-Sta ... +stock+pot. THe first one has a nice flase bottom like steamer that I could use for setting my grain bag on. I could run into a problem with it because there is only a 2.5 inch gap on the bottom of the pot (I called and asked about it). The second is a bit cheaper and I am not sure I would be able to use the basket because there would be no space for me to put a 5500 heat stick in it. I could however with this pot get something like a pizza screen that would fit inside the pot (the problem therein lies with the material. I think its aluminium but I see some jagged edges on the picture). So I want to pose the question which one should I go with?

Post #7 made 12 years ago
For what it's worth: Nothing wrong with aluminum, I've been brewing in an aluminum pot for years now.

---Todd
WWBBD?
    • SVA Brewer With Over 100 Brews From United States of America

Post #8 made 12 years ago
Ok, so I finnaly settled on a Ballington pot. Its 20 gallons and has a steamer on the bottom. There is also a gap of about 2/3/8 inches so there is enought room for me to put a heat stick, which is what I am leaning too. I have to get my BIAB method down first.

I think if you google Ballington 80 quart there should be a link to it on Ebay. Sorry I dont have a working camera so I am not able to post what it looks like yet.
Post Reply

Return to “Electric BIAB”

Brewers Online

Brewers browsing this forum: No members and 22 guests