Intermediate Brewing

1. When to adjust Evap Rate in BIABicus?

   6 Replies 4565 Views

   First post by bundy, 7 years ago

   First post

   ---

   

   Guys I am only a few brews in but already I am seeing a trend that my boil off rate seems to be a fair bit lower than what BIABicus calculates for me.
   
   Obviously plenty of variables, including weather, location etc. But I am thinking the biggest factor affecting my evaporation rate is the Power input when I am boiling.
   
   I use a 40L electric Urn with a 2.4kw element. I have searched back on the forum when PP was getting data for Boil off rates back in 2010. People were posting evap rates of 3.1...

   Last post

   ---

   

   Thanks for both the birthday wishes as well as the official ok from head office to tweak my biabicus!
   
   :-)
   6 Replies
   4565 Views
   Last post by bundy
   7 years ago
2. Help filling out BIABACUS properly

   7 Replies 6903 Views

   First post by blancasterb, 7 years ago

   First post

   ---

   

   Looking for some advice here.
   Seems just when I think I know how to fill out BIABACUS, I do something wrong.
   Was hoping a super experianced user would mind filling out BIABACUS for me using
   the below recipe.
   I of course will be using all grain (I left the extract info in there for those who may want to do it that way)
   
   Misc Info on my setup
   
   Section B
   Kettle Diameter 39.2 cm
   Kettle Height 42.4 cm
   
   Section X
   Kettle Shape Volume Adjustment 4.30 Liters
   
   I appreciate all the help!!
   
   Brandon...

   Last post

   ---

   

   Great answer nosco :salute:,
   
   This is an advanced area and one we don't have to worry about too much in the early days. Several things affect attenuation (how much fermentable sugar gets produced in the mash/sparge and then eaten by the yeast) and one of these is mash temperature. So, if you want to brew a Budweiser, if you were doing a single infusion mash, as nosco said you'd aim for a low mash temp of 62 C (143.6F). A stout you might wish to mash at 70C. THese are the two extremes of the...
   7 Replies
   6903 Views
   Last post by PistolPatch
   7 years ago
3. immersion pre-chiller

   26 Replies 17477 Views

   • 1
   • 2

   First post by jrodie, 9 years ago

   First post

   ---

   

   Anyone ever use an immersion pre-chiller? With a standard immersion chiller in the summer time I can just barely get the wort down to 80 degrees after about an hour of chilling. I than pour the wort into the fermenter and let it chill in a fridge for a few more hours to get it down to the mid 60's pitching temp. I started using an immersion pre-chiller to help. It has not been helping very much though. Still can't get the wort below 80 degrees. Normally I let the hose go full open through the...

   Last post

   ---

   

   ...and at about 30 minutes from the end of boil add 12 frozen pet bottles of a Belgian beer you brewed 10 years ago and never drunk. Excellent Steve :lol: :lol: :lol:
   26 Replies
   17477 Views
   Last post by PistolPatch
   7 years ago
4. some things you should just leave alone! lol

   4 Replies 4396 Views

   First post by pist, 7 years ago

   First post

   ---

   

   Well i just cracked a hefe that i bottled 2 weeks ago just to see how it was coming along...and this is one of those brews where you go damn! I should of just left it the way it was! :lol:
   
   The first batch i made...in my opinion was a cracker...bitterness was perfect...had a nice creamy head...and a nice whack of banana with just hints of clove. Yeast i used was wyeast bavarian wheat...and fermented itat about 22oC. This time i went for weinstaphen...fermented at 20oC. To be honest...i wish i...

   Last post

   ---

   

   TY PP,
   
   Appreciate the advice.
   
   Only use liquid yeast once and it was not a good experience. But I thought I would ask
   4 Replies
   4396 Views
   Last post by Yettiman
   7 years ago
5. pH strips - usage?

   3 Replies 3927 Views

   First post by blancasterb, 7 years ago

   First post

   ---

   

   In this post PistolPatch commented on using pH test strips
   Specifically finding this type on Amazon pH Duotest Analytical Indicator Paper Dispenser Roll of 5 Meters 3.5-6.8
   (If anyone orders these make sure you click the Amazon banner at the top of the page to support BIABrew.info)
   
   Anyways, I ordered these strips and they came in the mail the other day.
   I am just not sure how/when to use them. Obviously you put them in water, but when do you test?
   before the mash? during the mash, after the...

   Last post

   ---

   

   What PP say and I'd like to add that your mash pH is the only thing initially to consider, please note I didn't say worry about :)
   
   Take a sample after about 15 minutes let it cool and take a reading. It should be between about 5.4 and 5.6 at about 20c
   
   If after taking notes on about 4 or 5 brews the pH is consistently high we can give you some practical steps to take.
   
   I have pretty terrible water so I mix RO water/Town water and balance with salts but Town water on its own still makes good...
   3 Replies
   3927 Views
   Last post by chiller
   7 years ago
6. Something is off with my BIAB

   9 Replies 7511 Views

   First post by naptowndon, 8 years ago

   First post

   ---

   

   I have a few brew in a bags under my belt. About 8 now. My last 3 I have used the biabacus, but have only kegged one for my kegerator. However the others are currently on tap. The cream ale is clean, clear, has a lot of flavor and taste great. It was brewed beginning of the summer. Carbonated in the keg good head. My phat tire clone is clear has great color and the biscuit malt smell but has an astringent flavor for some reason. I brewed many of extract kits and they all came out great. I...

   Last post

   ---

   

   Bitterness can sometimes be mistaken for astringency. Did you chill the astringent beer differently from the others? Eg, leaving the wort an extra 20 minutes post f/o before turning on the chiller?
   9 Replies
   7511 Views
   Last post by stm
   7 years ago
7. Munich Dunkel or Schwarzbier recipe

   5 Replies 4614 Views

   First post by BungBrew, 7 years ago

   First post

   ---

   

   Does anyone have a good AG recipe for a Munich Dunkel or Schwarzbier? I've never brewed a lager before but will have a WLP883 Bock yeast in my hands tomorrow.
   
   I've only brewed ales before but have a ferm fridge so can control the temp.
   
   Anyone willing to share a proven recipe?
   
   Sent from my iPhone using Tapatalk

   Last post

   ---

   

   Turned out real nice, no tweaks planned. An earlier version had had feedback to increase the bitterness a little, so I did that.
   5 Replies
   4614 Views
   Last post by stm
   7 years ago
8. Did not hit target OG, why?

   25 Replies 16059 Views

   • 1
   • 2

   First post by blancasterb, 7 years ago

   First post

   ---

   

   I attempted to make a clone of Double Crooked Tree IPA - Dark Horse Brewing Company.
   My target OG was 1.130. I only made it to 1.110 OG. I did a 90 minute mash and a 90 min boil. If I would have boiled it any longer I would have passed my target VIF.
   Can someone look at my recipe and tell me what I could have done different.
   I try to stir the mash about every 15 - 20 min and add heat as needed.
   
   Thanks for any thought and/or advice!!
   Brandon

   Last post

   ---

   

   PistolPatch and Rick, if you both have a moment can you head over to the integrity thread and review my Irish Red Recipe please :peace:
   Brandon
   25 Replies
   16059 Views
   Last post by blancasterb
   7 years ago
9. Grain conditioning and BIAB

   11 Replies 8032 Views

   First post by chiller, 7 years ago

   First post

   ---

   

   For those who have the ability to crush their own grain a suggestion I'd like to make is conditioning your grain with water before crushing. I have used this for normal batch sparging and full volume mashing and the mash seems to float very well.
   Some claim better efficiency but I got basically the same but the run off was superb due to the way the grain was much more intact. Theoretically with BIAB that could be an advantage.
   Method:
   Get a spray bottle with water and spray the grains in your...

   Last post

   ---

   

   Here is an article on crushing.
   
   Sent from my SGH-I717M using Tapatalk
   11 Replies
   8032 Views
   Last post by Lumpy5oh
   7 years ago
10. Water to grain ratio?

    7 Replies 7086 Views

    First post by chiller, 7 years ago

    First post

    ---

    

    As I don't brew BIAB I have a question concerning water/grain ratio. I'm going to brew a Mild but the grain ratio is 9.27lt/kg.
    Have you noticed any detriment to the beer at those ratios? Mash pH, boil pH and/or final beer quality? I will modify my water to the general Mild profile.
    If you are brewing a Mild or similar how do you handle it as a BIAB recipe, final fermenter size about 22 litres. I certainly don't doubt it can be done just open to few guidelines.
    
    Steve

    Last post

    ---

    

    I thought I had one but will need to look further. I thought Kai had put together some material.
    7 Replies
    7086 Views
    Last post by chiller
    7 years ago
11. bad head retention on a mid ale

    9 Replies 7369 Views

    First post by alanem, 7 years ago

    First post

    ---

    

    Hi folks,
    A fair while back when I was searching in another forum for a nice summer mid-strength beer I was given this recipe ( see attachment ) it is due to be bottled in a few days but on doing a hydrometer test (1.007) this morning I had the customary taste from the tube and it seemed lifeless.
    I have brewed this brew 3-4 times and even though it is a nice refreshing drink, it seems rather thin and refuses to hold a head. I don't expect to get a full bodied glass of beer from a mid-strength...

    Last post

    ---

    

    Al , add the carapils to the last 30 min of the mash. I mill mine but hold them back from the grains.
    9 Replies
    7369 Views
    Last post by jhough
    7 years ago
12. Anyone make no-chill starters by decanting the trub?

    13 Replies 8686 Views

    First post by CheeseMoney, 7 years ago

    First post

    ---

    

    I no chill and was wondering about taking the leftover trub that I usually throw out and letting it settle out and then pouring the clear wort when it is time to make a starter. I make high gravity brews but could just dilute the wort when it is time to make the starter.
    
    Anyone else do this and can you recommend a small vessel (1/2 gallon or 2L would seem about the correct size)?
    
    Something like this 1/2 gallon bottle ?
    
    I'd need a vessel that can take very near boiling temperatures,...

    Last post

    ---

    

    Are your starters for liquid yeast?, this is definitely needed, but with dry yeast it isn't. Just checking...
    I always use liquid yeast.
    
    I'm wondering if this one would work. Some HDPE like the Winpak seems to be able to take 100C/212F. Some specs say only 65C/150F. for HDPE. Seems to depend on the product.
    
    This one doesn't list specs but says:
    
    Made of tough high density polyethylene , corrosion resistant. Lighter than glass jugs. Easy storage. All are white except #66300 which is...
    13 Replies
    8686 Views
    Last post by CheeseMoney
    7 years ago
13. Adding honey to BIABacus

    11 Replies 8767 Views

    First post by blancasterb, 7 years ago

    First post

    ---

    

    If I am going to add honey to a recipe, how do I input it in BIABacus?
    I suppose section F, however this will not consider the fermentation and end ABV .
    How can I input honey into the spreadsheet so that it will consider that in the final ABV.
    Or does it even matter?
    Brandon

    Last post

    ---

    

    I just made the answer up Brandon. Don't worry, just joking :).
    
    This is a really good question and I'm having a little difficulty in answering it.
    
    Using another Brewing Program
    
    Because I have BeerSmith, I often just use that for things like this. In BeerSmith, it said honey had a Potential of 1.035 or a Yield of 75%. BeerSmith has some real problems though when it comes to moisture content (see end of post) so I then just googled moisture content of honey and 20% came up as a reasonable...
    11 Replies
    8767 Views
    Last post by PistolPatch
    7 years ago
14. Chilled wort from kettle to FV (sludge)

    8 Replies 7042 Views

    First post by hoggyafc, 7 years ago

    First post

    ---

    

    Hello everyone
    
    I've got three or four BIAB brews under my belt now but there's a wee part that always confuses me (I hope I've got this in the correct part of the forum)...
    
    When I'm doing the boil, I've always put the hops in hop bags but still had quite a lot of sludge in the bottom of the kettle (i just have a big pot, no tap). Today I tried just sticking the hops straight in then when I was transferring to the FV, I used a sanitized bag in the FV to act as a kind of filter.
    
    Really what I...

    Last post

    ---

    

    Nothing like a technological innovation like clear glass to make our life/brewing more difficult! :lol:
    8 Replies
    7042 Views
    Last post by 2trout
    7 years ago
15. No aroma so far?

    2 Replies 3072 Views

    First post by BungBrew, 7 years ago

    First post

    ---

    

    I put down my forth BIAB AG on Saturday and the fermentation is going well so far (OG 1.045 currently at 1.030) I am fermenting reasonably low as I am not in a rush :)
    
    After taking a sample today I noticed there was no hop aroma at all? Would some hop aroma be present half way through fermenting? The wort tasted malty and still sweet.
    
    Should I dry hop after it has fermented out? It's an American Brown Ale style brew.
    
    Should I dry hop with Citra or Galaxy or both? how much? Would 30g of each...

    Last post

    ---

    

    I ended up dry hopping with 25g Galaxy and 25g Citra .. smells pretty good now :)
    2 Replies
    3072 Views
    Last post by BungBrew
    7 years ago
16. Biabacus question about bulk sugar

    2 Replies 3299 Views

    First post by FLKeysBrewer, 7 years ago

    First post

    ---

    

    Have done two simple brews with the Biabacus and loved the conversions and everything went well and I hit my target gravity spot on.....
    
    Now trying a Belgian Tripel and in the original recipe it calls for 2 lbs of Belgian candi sugar...not sure where to enter it into the spreadsheet....do I treat it like grain and enter it there and let the calculations occur? When I do it bumps it up to 2.6 lbs which seems wrong and it looks like its treating it like grain and not pure sugar.....but if I...

    Last post

    ---

    

    Thanks so much for the quick reply Balli. I did some googling with the info you provided and I now see what the Biabacus is doing....and have some good reference sites bookmarked!!!
    
    Wish me luck
    
    KeyLargoJeff
    2 Replies
    3299 Views
    Last post by FLKeysBrewer
    7 years ago
17. Help with a Biscuit Porter

    4 Replies 4135 Views

    First post by adamsjam, 7 years ago

    First post

    ---

    

    I need a little feedback on my first recipe that I have worked out using your excellent BIABACUS tool. I am looking for a porter with a fair amount of biscuit flavor. I have referenced both the Brewing Classic Styles and the great book, Designing Great Beers (Daniels). Can you please take a look at what I have come up with and comment? Thanks in advance for your help.
    Jim Adams
    CrownPoint Brewery
    
    BIABacus Pre-Release 1.3I RECIPE REPORT
    BIAB Recipe Designer, Calculator and Scaler.
    (Please...

    Last post

    ---

    

    PP:
    
    Thank you very much for the feedback. I have already brewed about 5 batches of various types using the BIAB technique. I am getting better, but still have a ways to go. But that is the fun. I have had quite a variability on my efficiency amounts that are calculated in section P (EIB). May last batch was closer to an EIB of 58%. I guess I am confusing that with the kettle efficiency. Not to worry, it all tastes great!
    
    I did modify the receipt in an effort to round out the taste with a...
    4 Replies
    4135 Views
    Last post by adamsjam
    7 years ago
18. Efficiency

    9 Replies 7119 Views

    First post by jrt132, 7 years ago

    First post

    ---

    

    I have a quick question that is covered in detail on the forum, but I just wanted to simplified the discussion specific to my brewing.
    
    I have brewed 3 or 4 BIAB batches. My efficiency at the conclusion of the mash is about 60%. Outside of the extra grain I have to purchase, which is about a few US dollars per brew, does my low efficiency matter?
    
    Thanks!

    Last post

    ---

    

    ...what software are you using? How are you coming to those 60% figures? So many important things getting missed/un-answered here :dunno:.
    I am brewing a really low OG beer soon. The beer is going to be a 3.5% ABV English Mild. I should see a large increase in my kettle efficiency then. I will report back the results. You should see an increase in kettle efficiency (assuming you can get accurate measurements on that single brew) but you still haven't let us know if anything written here so far...
    9 Replies
    7119 Views
    Last post by PistolPatch
    7 years ago
19. ¡!Libby's pumpkin in a can=concerning brew situation!¡

    3 Replies 4442 Views

    First post by herne, 8 years ago

    First post

    ---

    

    brewed a pumpkin.ale im excited its my first pumpkin ale. I call it pumpkin pie on wheat crust. So bout that bunk pumpkin, I added 4lbs of Libby's canned pumpkin to my bag right on top of my grains. I dunk it in @ 120°f I swear dust in the came on the radio I look up and I thought all right. I look down and libby's pumpkin has completely dissolved and went through my bag!¡ (ironically like dust in the wind) has anyone done a pumpkin ale with actual pumpkin if so have you experienced this...

    Last post

    ---

    

    Have a look through this post here .
    
    It looks like it gets retained here, but as laserghost said, I am sure it will be fine.
    
    Mally,
    I'm honored that you would link to my thread regarding my very first BIAB, All-Grain, No-Chill attempt. I still have a couple bottles of that Pumpkin Ale around. It's a bit over-carbed, and I'm not sure that I'm satisfied with the result. Of course, it could be that I haven't sampled enough professional pumpkin ales to know what it's supposed to taste like....
    3 Replies
    4442 Views
    Last post by kzimmer0817
    7 years ago
20. How do I salvage these grains?

    4 Replies 4780 Views

    First post by opalko, 8 years ago

    First post

    ---

    

    I went to my local shop today where I have bought many times before. I wanted 6 pounds of Maris Otter and .5 pound of roasted barley. I only make 1/2 size batches - 2.5 gallons BIAB because it's just easier and I like to do it inside and that's the most I can make at one time.
    
    In any case before I know it the guy goes in the back and starts milling the grain. Whoa - I didn't need it milled and prefer it not be milled as I like to do it myself and I've bought plenty there before unmilled. Too...

    Last post

    ---

    

    you should have made the guy make your order the right way. no reason to pay for something you don't want/didn't ask for. At my LHBS it is self-service with the grain and milling, which is awesome!
    
    if you mix up the grain long enough, they should be mixed evenly. not sure how long you'd have to mix it though...
    4 Replies
    4780 Views
    Last post by Three3Beer
    7 years ago
21. Mash - grain/liquor ration

    3 Replies 4113 Views

    First post by maevans, 7 years ago

    First post

    ---

    

    Hi all,
    
    Just putting a recipe together for an IPA. I think the only thing I haven't really got to grips with is the Mash thickness - i.e. the water to grain ratio.
    
    Is there an accepted range I should be aiming to hit between in terms of Litres to KG?
    
    EDIT: I should say, the recipe I've created is currently giving a 6L:KG (2.88qt/lb) ratio.

    Last post

    ---

    

    BIAB uses the full volume of water right at the start, dispelling yet another brewing myth about using the proper grain/water ratio.
    
    I can and have gone into lengthy discussions about L:G ratios. Mainly, people seem to be concerned about Beta Amalayse enzymes becoming denatured too quickly at such a high L:G ratio; and leaving you with an overly dextrinous wort. Then again, others say that a thin mash leads to increased fermentability, and therefore BIAB worts will be overly dry. In a way,...
    3 Replies
    4113 Views
    Last post by thughes
    7 years ago
22. "Accelerated" no chill

    2 Replies 3295 Views

    First post by Berk, 7 years ago

    First post

    ---

    

    Hi. I'm a small batch (3 gallon) BIABer. I've also had good luck fermenting in a corny. After my plate chiller got stuck the other night and then spending an hour cleaning it out, I started thinking about no chill. One downside I'm concerned about (although I guess there are work arounds) is the impact no chill has on flavor and aroma hops. Anyway, what if I did a hot transfer of wort into my fermentation keg, then ice bathed the keg to get it below, say, 100F and then let it no chill overnight...

    Last post

    ---

    

    Hi there Berk,
    
    Nothing wrong with your idea at all. Chilling in normal cold tap water temperature will be about as good as using an ice bath so don't worry about going to all the hassle of making ice etc. You really only should use ice in a chilling situation when you have chilled your brew close to your cold water tap temperature.
    
    If you are doing small batches, it might even be worth the little extra time of chilling in your sink as I would imagine your kettle would fit in it? The trick is...
    2 Replies
    3295 Views
    Last post by PistolPatch
    7 years ago
23. Advice for strike temp problems?

    8 Replies 6739 Views

    First post by Epimetheus, 7 years ago

    First post

    ---

    

    How can I improve the technique for hitting the proper initial mash temp?
    
    It seems simple but the mash temperature always seems to start too low or high by 5C. I measure the grain temperature and weight, water temperature and volume, and use a strike temperature calculator. For example, the le strike water should be atest batch was planned for 20l. Mash conditions were
    
    5.06kg grain,
    20l water (the remainder reserved for dunk sparges),
    28l Al tamale pot,
    Insulation is 3 layers of...

    Last post

    ---

    

    ...That means people with equipment get all tied up in the equipment instead of paying attention to the product. Epi, I'm not sure if that is the best sentence I have seen written here or just one of the best. I'm thinking that it could be the best.
    
    Thanks for that absolute gold quote fella. I'm bookmarking it now :salute:.
    8 Replies
    6739 Views
    Last post by PistolPatch
    7 years ago
24. weird low effeciency day

    6 Replies 4754 Views

    First post by jrodie, 7 years ago

    First post

    ---

    

    So I was trying to make an imperial stout the other day and only got somewhere inbetween 50-55% effeciency. I have been pretty consistent with 70-80% effeciency for sometime now, so I am a little confused what I did wrong.
    
    Here is some stats on the day.
    
    Grain Bill:
    15 pounds two row
    .5 roasted barley
    .5 chocolate
    .5 pounds english black malt
    .5 pounds english medium crystal
    Mashed in with 8 Gallons of water at 152 F
    90 minute mash time. It was very cold outside so my mash temperature did drop...

    Last post

    ---

    

    jrodie, I know you haven't seen MS's post above as yet but I think it is spot on.
    
    I think that MS assumed that you were using the BIABacus but... So I was trying to make an imperial stout the other day and only got somewhere inbetween 50-55% effeciency. I have been pretty consistent with 70-80% effeciency for sometime now... and a look through your past posts makes me think that you, like a lot of brewers, are using some commercial software or other software you stumbled upon on the net and...
    6 Replies
    4754 Views
    Last post by PistolPatch
    7 years ago
25. bottling a choc stout

    3 Replies 4219 Views

    First post by Brendandrage, 8 years ago

    First post

    ---

    

    Hi all,
    Im about to bottle my first stout as i do enjoy a stout its not something i want on tap at this stage.
    I have never brewed or bottled a stout before and im using 270ml bottles.
    I was curious how much sugar i should use per bottle for a stout or how much for bulk priming?
    I have brewed 2 x 20 litre batches
    
    Cheers

    Last post

    ---

    

    Note that this post here contains the same bottling calculations as used in the BIABacus.
    
    [ Please note that Hints does not reply to direct questions. ]
    3 Replies
    4219 Views
    Last post by Hints
    7 years ago