Re: My First Post! - Post here to become Fully Registered

Post #8927 made 1 month ago
Welcome @kush1960

Let us know if you have any questions moving forward.

My brew kettle is about 16 gallons and depending on gravity of beer brewed - most of my brews are just over 1.050 OG - normally get a little over 8 gallons VIP (Volume Into Packaging). That can range to over 9 gallons on a lower OG beer and a little over 7 gallons on a higher OG beer. I like to brew but it certainly takes time and effort. So like to maximize capacity of my system. Extra beer goes into cleaned and sanitized 1 gallon or 0.5 gallon fermenters, or bottles, and extra beer is stored in the fridge and tops off the keg when I get low and haven’t brewed the new batch yet. Sounds like that’s what you are moving toward. It works pretty well!


If not done yet, you will want to download the BIABacus Excel file, free on this website. Also I would read the CBT page - Clear Brewing Terminology - so the terms used are clear to you.

Best of luck, and let us know how it goes.
    • SVA Brewer With Over 50 Brews From United States of America

Re: My First Post! - Post here to become Fully Registered

Post #8931 made 1 month ago
Welcome Leo, if you haven't done so already you'll want to have a look at the brewing software developed here, BIABacus, https://biabrewer.info/viewtopic.php?f=5&t=1869. It's an excellent tool for nailing your brew day. Also this thread https://biabrewer.info/viewtopic.php?f=5&t=2685 will help you get familiar with the terms you'll see in use around here. Let us know if you need help with anything.
    • SVA Brewer With Over 20 Brews From United States of America

Re: My First Post! - Post here to become Fully Registered

Post #8932 made 3 weeks ago
Hi! My name's Neil, I'm a noob brewer in Melbourne, Australia. My wife got me a Craftabrew starter kit for my birthday, (extract kit, 1 gallon) and I've brewed and fermented it and just waiting for the bottles to carbonate. While waiting impatiently I started reading a lot about homebrewing, and discovered this site via a podcast interview. I'm already planning to upgrade to a one vessel grain setup, but the wife doesn't want me to get bulky (bigger than 1 gallon) kettle or carboy. So I'm here trying to figure out how to do a BIAB recipe in a 5L stove pot and 1 gallon carboy. Need this post to download the calculator. :)
    • SVA Brewer With Under 5 Brews From Australia

Re: My First Post! - Post here to become Fully Registered

Post #8933 made 2 weeks ago
Welcome, Neil.
The BIABacus spreadsheet can scale recipes well, but at the 1 gallon level, it gets a bit stressed to do so. you are going to have to do the experiment. The grains and the mash result will probably give you close to the expected Gravity Into Boil but the Original Gravity (OG) at the end of the boil might vary because of the effect of small scale. Ask questions when you have them, somebody here will get back to you.

Re: My First Post! - Post here to become Fully Registered

Post #8934 made 4 days ago
Hi All,

Reside near Coffs Harbour, NSW Australia. Been brewing for a few yrs but only pimped up kits with partial grain steeps etc added. Hope to transition to AG via BIAB. Can see the upside of AG but feel BIAB can keep brew days simple enough that it won't detract from the hobby. Stumbled across this site, as while I'm on a few other brewing forums this one is far and away the best for BIAB specifics.

Haven't actually given BIAB a go yet - want to try a few smaller efforts with my existing gear (20L pot) to try and also combo/partial with a bunch of unhopped LME I have onhand. Also looking to move away from fermenting larger (for me) brews of 25-30L in fermenter, down to 15-22L max in fermenter via moving to no-chill/cubes and actually fermenting directly in the cubes.

Have a temp controlled brew fridge and I bottle exclusively. I've felt my results have been mixed mainly as I strayed from established recipes. My work is limited to maintaining our rural property and doing all the housework etc, very lucky in that regard. Thanks in advance to all those who have put in the yard yards already in these forums, look forward to contributing in some small way. Thank you, Nick

Return to “BIABrewer.info and BIAB for New Members”

Brewers Online

Brewers browsing this forum: No members and 50 guests