Post #6476 made 10 years ago
Welcome Geeeoner,

Great to hear your already going with BIAB Brewing!!!

many of the Above Posts, show where to get the BIABACUS, and helpful Information.

Let us know what questions you have, and we will certainly Answer!
Honest Officer, I swear to Drunk, I am Not God.
    • SVA Brewer With Over 100 Brews From United States of America

Post #6477 made 10 years ago
Howdy folks !

New to brewing, four extract batches in, started a couple of months ago.

While trolling brewing sites I noticed the references to BIAB, and really
interested in trying that out. I visited with a local home brewer and
was overwhelmed by the amount of equipment that he indicated was really
"important". This looks like a simpler, less expensive method that will
allow me to keep the wife happy (less junk).

Have my eye on a 10 gallon pot from a kitchen supply and have looked at
bags online. Plan on pulling the trigger soon.

Cheers !

Post #6478 made 10 years ago
Hi folks,

I'm from Orange County, California. I stumbled across this site after I saw some folks reference BIABacus in another forum. Seems like there is a lot of great information packed in this forum.

I'm pretty new to the brewing scene--I only have two brews under my belt. The first was an extract kit that came as part of my equipment package. My second brew was a BIAB Maris Otter/Cascade SMaSH (its in the primary). On my last batch, I loss quite a bit of efficiency going from the kettle to the primary, so I'm looking on ways to improve that.

I work as a number cruncher during the daytime, so an BIABacus being an excel sheet is right up my alley.

Thanks for having me on board.

Cheers!

Post #6480 made 10 years ago
Hi everyone,

My name's Itai and I'm from Israel. I've been brewing extract/partial mash for a bit and recently brewed my first all grain batch (Maris Otter/Centennial SMaSH). I don't have an appropriate bag so at the moment I'm using a strainer along with an adaptation of the maxi-biab method. I'm limited in time and space and am a big fan of simplifying the brewing process where possible. The various biab methods are perfectly suited for this (and my small stove top and apartment).

I found the site through various google searches and have since learned quite a bit from the information here. After reading up on the site, my first all grain batch went much better than expected, which is very encouraging.

I'm looking forward to being part of the community and further improving my brewing. Cheers!

Post #6483 made 10 years ago
JBG, Welcome to the Forum,

When you have questions, just Post!

Let us know how your 1st BAIB batch goes, and how it turns out.
Honest Officer, I swear to Drunk, I am Not God.
    • SVA Brewer With Over 100 Brews From United States of America

Post #6484 made 10 years ago
Greetings, allow me to "sign in". I registered last year, looked around briefly but didn't introduce myself or anything at that time...

I've been doing mainly extract (kit & recipes) brews for about a year and a half now - I tried 2 BIAB brews last year that came out so-so, but due to extreme time constraints with my job I decided to stick with only extract brews for awhile...

The other day I was brewing my favorite summertime pale ale, and wrestling with trying to accurately dose the liquid malt extract which of course, does NOT come in the exact size packages I need for the recipe... and then I thought to myself... since I'm steeping specialty grains for 30 minutes anyway... doing a BIAB would really only add a half-hour to my brew process...

So here I am again. Planning to read & learn (my previous 2 batches came out OK, but not great) - and figure out how to make BIAB work with my current kettle (10 gal Northern Brewer Megapot 2) - I have one of Wilsenbrewer's mesh bags, but no way of setting up a pulley or anything, so was thinking of getting one of Utah Biodiesel's BIAB filters & just get it in very coarse mesh to act as a bag support... I currently have a turkey fryer basket but the diameter is significantly smaller than the inside of my pot due to the temperature probe intruding in... But I'm sure others have solved the same problem, so I'll spend a little time poking around & reading... and learning how to use that BIAB calculator you guys have...

Rich L
Last edited by richl025 on 15 Jun 2015, 04:34, edited 11 times in total.

Post #6485 made 10 years ago
G'day everyone,

I'm from Melbourne and I'm fairly new to brewing, save for a dismal effort with extract about 10 years ago. After drinking way too much craft beer for the last couple of years I finally bit the bullet and got myself a crown urn and all the associated goodies a couple of weeks back and brewed my first batch this past weekend - an APA which is now bubbling away nicely in the fridge out the back.

Been reading plenty of threads here and around the internet the last couple of months and thought it was probably time I registered and stopped lurking!

Cheers!

Post #6486 made 10 years ago
Welcome and Congrats Eldertaco.
The urn seems to be a popular brew kettle and lots of folks here will be able to help.
Some people are like slinkies. Not good for much, but bring a smile to your face when pushed down the stairs.

Weehoosebrewing.ga
    • SVA Brewer With Over 20 Brews From Canada

Post #6487 made 10 years ago
Hello from Oklahoma. I've done 1 extract and 4 partial grain batches and found this site while trying to learn more about BIAB. Inspired by a guy on HBT doing all grain BIAB on the stovetop while living in an apartment I thought "I could do that". I built an electric brew controller and wired a plug in my garage to quell the harsh looks from the wife (not everyone appreciates a nice hop addition smell in the house :thumbs: ). Now I'm on an adventure to brew great beer and see how many different types of beer I like.

Post #6488 made 10 years ago
Hi Guys

I'm from Middlesbrough, England and I've been brewing for a few years now. Started when my wife suggested I get a hobby!!

As most probably did I started with kits then quickly moved onto extract brews, then partial mash and have just done my second BIAB.

The first was a dark mild which came out really well and the 2nd, a standard English bitter, has just gone in the fermenter yesterday.

I currently only have a 15L pot and am quite happy with what I've been able to produce do far.

Alan

Post #6489 made 10 years ago
Hello to vallan & Alan Jones. I too was kicked outdoors for the aromas. Get the BIABacus to work for you for scaling recipes and more. You can submit it to the forum for comments or help and then know the amounts and times are good while our ever-improving (?) techniques march along.
Hey, vallan, my spellcheck tried to turn your name into a brand of beer my grandfather used to drink!
    • SVA Brewer With Over 100 Brews From United States of America

Post #6490 made 10 years ago
Hi all,

I'm Mark from North Wales in the UK.

I've been brewing just over 2 years. I did a couple of kits and quickly went biab, then on to a 3v system, and now back to biab due to time constraints (kids eh?).

My set up consists of a 50l kettle with a 2.75kw element. I generally brew on my stove too, so use a ring of the hob to speed things up a bit. I've got a pump and planned to recirc between steps, but it's so slow heating up, I generally don't now. I will be adding an extra element soon, building a PID and i'm talking to someone about making me a mesh basket so I can have a budget braumeister or grainfather type of set up :)

Since brewing, like many of you I'm guessing, i've got a lot more into beer in general and my palate has changed. I have brewed a lot of British style beers and hoppy IPA, but I'm going to start experimenting with Belgian beers and other European styles.

Cheers

Post #6491 made 10 years ago
markm1878 wrote:Hi all,

I'm Mark from North Wales in the UK.
Hi Mark
Welcome to the club,
Sounds like your pretty much up to speed
I've only ever done done a few kits before Biab, have a play around with the Biabacus it a good piece of kit.
I'm sure the more experienced members here will help you out if you have any queries,
Regards
TT
Last edited by tingtong on 17 Jun 2015, 20:25, edited 11 times in total.
[center]i ting tong![/center]
    • SVA Brewer With Over 20 Brews From New Zealand

Post #6492 made 10 years ago
Hello, everyone! I'm Cristina, from the greater Seattle area. I brewed my first (partial-extract) batch two weeks ago, and I looked at my bag of steeping grains and thought, "well...this is silly. One more hour with these bad boys and I wouldn't have to use that sticky jar of goo," so here I am! I'm really excited to try BIAB, especially since I'll be scaling my batches down (an impending move to a tiny kitchen), and I'm very happy to meet you all!

Post #6493 made 10 years ago
Welcome Cristina (Crizzle),

BIAB all-grain brewing is a great way to brew the best beer possible.

To Start, You can Download "BIABACUS" at http://www.biabrewer.info/viewtopic.php?f=5&t=1869

and get "The BIABacus - Help" at http://biabrewer.info/viewtopic.php?f=55&t=1863

And when you have questions about BIAB, there are many here that can answer any question!
Honest Officer, I swear to Drunk, I am Not God.
    • SVA Brewer With Over 100 Brews From United States of America

Post #6494 made 10 years ago
crizzle wrote:I looked at my bag of steeping grains and thought, "well...this is silly. One more hour with these bad boys and I wouldn't have to use that sticky jar of goo,"
Truer words have never been never spoken!

---Todd
Last edited by thughes on 18 Jun 2015, 03:07, edited 11 times in total.
WWBBD?
    • SVA Brewer With Over 100 Brews From United States of America

Post #6495 made 10 years ago
joshua wrote:Welcome Cristina (Crizzle),

BIAB all-grain brewing is a great way to brew the best beer possible.

To Start, You can Download "BIABACUS" at viewtopic.php?f=5&t=1869

and get "The BIABacus - Help" at http://biabrewer.info/viewtopic.php?f=55&t=1863" onclick="window.open(this.href);return false;

And when you have questions about BIAB, there are many here that can answer any question!
Thanks, Joshua! The BIABacus is one of the things that caused me to join, as opposed to ghosting on the forum for a while. I'm really looking forward to using it.
thughes wrote:
crizzle wrote:I looked at my bag of steeping grains and thought, "well...this is silly. One more hour with these bad boys and I wouldn't have to use that sticky jar of goo,"
Truer words have never been never spoken!

---Todd
Todd, I'll be saving this quote to prove to my significant other that I can, in fact, be right :cool:
Last edited by crizzle on 18 Jun 2015, 04:34, edited 11 times in total.

Post #6496 made 10 years ago
This is Alan coming at thee from Yorkshire UK.

Brewed my first AG FVV BIAB (a kind Amarillo mash up following Ralphs brilliant guide on here) on May the 25th which has now been conditioning in bottle for the last 10 days, 19 hrs, 17 minutes...

On the whole it went very well and I have high hops for the finished beer. My main lessons for the next time are to make a note of the sparge volumes and not to melt my plastic hydrometer jar with near boiling wort :blush: .

Absolutely loving the forum.
Last edited by @mre_73 on 19 Jun 2015, 22:01, edited 11 times in total.

Post #6497 made 10 years ago
Welcome aboard Alan! Lol on the 10 days 19 hrs 17 minutes hahaha, its a tough wait isn't it :) Once you get going and get a bit of a pipeline happening you will be able to rest easier I assure you. I usually start sampling after the first week of conditioning, for research purposes of course :) But it always tastes better after a few and I always wish I didn't do so much tasting research when the beer really hits its stride, which is usually when I get down to the last few bottles hah!
    • SVA Brewer With Over 100 Brews From Canada

Post #6498 made 10 years ago
1. Where are you from?
Originally from Phoenix AZ, but I joined the military at 17 and I am still on USAF active duty 28 years later. I am currently in Las Vegas (Nellis AFB), but I have no idea where the retirement (military) location will be in a few years.

2. How did you stumble across the site?
Doing searches on BIAB about two years ago, and I've been in lurk mode since. HBF covers a lot, but misses the dedicated BIAB part. I also find there's too many 'purists' that snub their noses at BIAB, and that's a shame.

3. What you think of it so far?
Great. A little slow and awkward as compared to other forums I use for other hobbies.

4. Have you brewed at all before. If so, for how long and what method are you currently using?
Started extract brewing in 1995, moved to 3-vessel all-grain in 1997 and paused brewing in 2000. I picked it up again (extract only) while on a remote, overseas assignment in 2012 where we could not buy beer easily, and that which we did find was stale/heat struck by the time we got to it. I came home in 2013 and kept brewing using extract, but wanted to go back to the goodness of all-grain without the associated hassle & time. BIAB seemed the perfect solution, and I've been brewing that way since late 2013. I recently upgraded/built my setup into a eBIAB one, where large temp swings are done on a Blichmann burner, but I can hold mash temps with my RIMS tube spot on--nice.

5. Do you work? Are you retired or maybe you run a household?
Still serving, with no plans to retire from the military anytime real soon, but it's around the corner.
Last edited by stealthfixr on 22 Jun 2015, 05:20, edited 11 times in total.
Mark Rose
eBIAB RIMS

Post #6499 made 10 years ago
Welcome to the forum and thank you for your service!

If you've been lurking you already know there is a lot of good info and help available here.

It would be interesting to hear about your experiences...remote brewing. Again, welcome to the forum.

Scott
    • SVA Brewer With Over 50 Brews From United States of America

Post #6500 made 10 years ago
Scott wrote:It would be interesting to hear about your experiences...remote brewing. Scott
I lived in an Islamic country capital for a year, working in the US Embassy enclave. We (Americans, ex pats) could get alcohol through the Embassy Commissary, but the local customs folks ensured that the beer arrived stale and nearly destroyed (hot place)--plus it cost a LOT (I paid $76 for a case of St Pauli Girl Dark, and it was awful). The disgust over that beer and finding some basic brewing equipment in one of the houses led me to brew again.

Midwest Supplies turned out to be very accommodating for sending kits, and dry yeast made the voyage mostly intact. Aluminum pots of a large size were easy to find downtown, as was PVC tubing. The Department of State provided houses had distillers (large ones) for drinking water, and I slowly filled 5 gallons+ of water jugs for brewing water. The rest was basic extract brewing on a house gas stove (never quite got to a rolling boil, but close), except chilling the wort was done in a cleared out freezer, which still took 3-4 hours to get to pitching temps. Fermentation was done in a un-occupied basement with the A/C raging down to 65F or so. It worked, and the beer by stateside standards was good, but in that situation far removed from home, the homebrewed IPAs, Porters, Kolsch, and Hefeweizens (etc) was awesome. My beer got fairly popular, and I ended up teaching three newbies how to brew while there--and that was fun!

More importantly, the experience rekindled my love of brewing. Although my time now is more limited than ever, and I have other hobbies that distract me, I make time for brewing and enjoy the results of it almost every day. Using eBIAB RIMS, temperature controlled fermentation and other improvements, I think my beer's getting to a darned good level. Lots of fun and satisfaction.
Last edited by stealthfixr on 22 Jun 2015, 11:25, edited 11 times in total.
Mark Rose
eBIAB RIMS

Return to “BIABrewer.info and BIAB for New Members”

Brewers Online

Brewers browsing this forum: No members and 74 guests