Please help with my 1st recipe input

Post #1 made 13 years ago
Here is the recipe I used to plug into my BIABacus and attached is my input into BIABacus for the first time. I have several questions, too.
1. What is EBC in the grain bill section? I had to keep adding and subtracting to get the SRM number to match the recipe below.
2. Are the definitions somewhere of EBC and SRM etc?
3. In section K, what is the actual amount of water I use at the very beginning? Where do I find that number?
a. None of those numbers match the boil size 8.27 gallons the original recipe is stating.

I think that is all for the moment, but I am sure I will have more questions when I get started.
Thank you,
Kyle

Recipe: Sock Monkey Stout
Brewer: Todd Hughes
Style: Stout
TYPE: All Grain
Taste: (30.0)
http://www.biabrewer.info/viewtopic.php ... 429#p20369
Recipe Specifications
--------------------------
Boil Size: 8.27 gal
Post Boil Volume: 7.02 gal
Batch Size (fermenter): 5.50 gal
Bottling Volume: 5.00 gal
Estimated OG: 1.050 SG
Estimated Color: 26.5 SRM
Estimated IBU: 34.5 IBUs
Brewhouse Efficiency: 60.00 %
Est Mash Efficiency: 73.6 %
Boil Time: 60 Minutes

Ingredients:
------------
Amt Name Type # %/IBU
6 lbs Pale Malt (2 Row) US (2.0 SRM) Grain 1 46.2 %
4 lbs Vienna Malt (3.5 SRM) Grain 2 30.8 %
1 lbs Caramel/Crystal Malt -120L (120.0 SRM) Grain 3 7.7 %
1 lbs Roasted Barley (300.0 SRM) Grain 4 7.7 %
1 lbs White Wheat Malt (2.4 SRM) Grain 5 7.7 %
2.00 oz Cascade [5.40 %] - Boil 60.0 min Hop 6 32.9 IBUs
0.50 oz Cascade [5.40 %] - Boil 5.0 min Hop 7 1.6 IBUs
1.0 pkg Nottingham (Danstar #-) [23.66 ml] Yeast 8 -


Mash Schedule: BIAB, Medium Body
Total Grain Weight: 13 lbs
----------------------------
Name Description Step Temperat Step Time
Saccharification Add 36.72 qt of water at 160.1 F 152.1 F 90 min
Mash Out Heat to 168.0 F over 7 min 168.0 F 10 min

Sparge: Remove grains, and prepare to boil wort
Notes:
------
Fermented for 2 weeks at 65F, bottled with 1oz (by weight) corn sugar per gallon.
You do not have the required permissions to view the files attached to this post.
Last edited by phytenphyre on 19 Dec 2013, 03:28, edited 2 times in total.
Primary: Zombie Dust Clone, 3rd BIAB
Secondary:
Bottle: Black IPA, Sock Monkey Stout, Hop Burst IPA
Wish List:12 months/12 brews

Post #2 made 13 years ago
Hey Kyle,
There is a color conversion on the 2nd tab, 'unit conversion', makes it easy.

In Section K you start with TWN, this is at an ambient temp, and when heated up to strike temp it expands to SWN.

I made two changes to your file, #1 - Section D gets a 20.83 L value as it matches what you see in Section K (also matches the recipe). The fermentor volume and bottle volume matches up, that is what your final target volumes are (also matches the recipe).

#2 - Small change, but only the first OG in Section C should be there. Remove 2nd value.

:peace:
MS
    • SVA Brewer With Over 100 Brews From United States of America

Post #3 made 13 years ago
MS - Thank you. I had to replace the Vienna Malt, my LHBS just ran out so I replaced it with Castle Biscuit. I updated that info as well as the info you added.

Brewing on Saturday so I am excited to use this program and see what I can come up with.

Cheers,
Kyle
Primary: Zombie Dust Clone, 3rd BIAB
Secondary:
Bottle: Black IPA, Sock Monkey Stout, Hop Burst IPA
Wish List:12 months/12 brews

Post #4 made 13 years ago
As I am typing this, I am 68 minutes into my mash!! I hit my mash temp dead on!! So far it smells so good. Brewing an off-shoot of "Sock Monkey Stout", I had to change my Vienna Malt and chose Castle Biscuit instead so I guess this is a first time for this beer!! AWESOME!! Also, I am using my new DIY BIAB bag - that seems to be working just fine. It's 43F outside now and I only lost 2F over 60 minutes with my kettle covered. I love this way of brewing!! I have found 13 pounds of grain is about the max for my kettle. BIABacus gave me a warning I was near the max of my kettle...it was right on, I'm right at the rim, but no overflow!! I'm so excited about BIAB, trying to take as many notes as I can, too.

One thing I would like to know is, is there a form of things to fill out while brewing to make sure you get all of your measurements etc etc? I am sure there are a lot of things I am not checking for just because I don't know what to check when.

Thanks to all.
Primary: Zombie Dust Clone, 3rd BIAB
Secondary:
Bottle: Black IPA, Sock Monkey Stout, Hop Burst IPA
Wish List:12 months/12 brews

Post #5 made 13 years ago
Kyle, I hope the rest of the day went well and sorry no one could answer your questions above in time. Section L through to Section Q of the BIAabcus has lots of things you can measure and record but the main ones to aim for, if you get time during the brew are...

1. Volume into Boil - Sect L
2. Gravity into Boil - Sect M
(These two will you your Efficiency into Boil)

3. Kettle to Fermentor Loss - Sect L
4. Volume into Fermentor - Sect L
5. Gravity of Ambient Wort - Sect M. Will always be the same as OG unless you add DME or water to the fermentor.
(The three above will act as a double check on your Efficiency into Boil and will also give you an Efficiency into Fermentor).

In the next version, we'll make it so that evaporation will be worked out as well from the above numbers. For now, you either have to measure your Volume at Flame-0ut or calculate it from 3 and 4 above.

Let us know how the rest of the day went.

:peace:
PP
If you have found the above or anything else of value on BIABrewer.info, consider supporting us by getting some BIPs!
    • SVA Brewer With Over 100 Brews From Australia

Post #6 made 13 years ago
Hey! I hear that Sock Monkey Stout is some tasty stuff. :whistle:

Let us know how it worked out with the bisquit malt. I will usually substitute Munich for Vienna if the Vienna is not available, sometimes I throw in some flaked barley too (adds a bit more creaminess). I tend to brew like I cook: a pinch of this and a pinch of that....only downside is that you can never exactly duplicate a particularly good recipe (unles you are anal-retentive about taking notes, which I am not).

---Todd
WWBBD?
    • SVA Brewer With Over 100 Brews From United States of America

Post #7 made 13 years ago
Thanks for the recipe, Todd. I will let you know when that day comes to do some tasting. I can't wait to try it. Keeping my fingers crossed.
Primary: Zombie Dust Clone, 3rd BIAB
Secondary:
Bottle: Black IPA, Sock Monkey Stout, Hop Burst IPA
Wish List:12 months/12 brews

Post #8 made 13 years ago
Ok, here is the run down of my brew day from last night. I have a couple of questions at the end if anyone can help:

"Sock Monkey Stout"
I brewed in my garage, temp was 43F at the start
I started heating my water at 4:45 pm
Added about 8.4 gallons of water to strike
Started my mash at 5:20
Strike temp 157F
Mash at 152F - hit it perfectly
Wrapped my kettle for 30 min, checked at 30 and had not lost any temp, no stir
Wrapped for another 30 min, checked, lost 2F in 60 min, stirred and re-fired for short time
Wrapped for another 30 min, actually came in at 155F, I got it a little warm with my re-fire.
Pulled grains, drained, dipped, drianed again, squeezed the heck out of the bag many times
Ended up with about 7.5 gallons at 202F pre-boil
Started boil at 7:17pm
Hit 1.040 pre-boil
Immediately after boil I had about 5.6 gallons
After cooling I had about 5 1/8 gallons
Racked to primary at 9:20pm
Rehydrated yeast
Pitched at about 71F
Zero loss in kettle - I drained the whole thing - lots of trub in primary though
Hit 1.051 after cooling in beaker
** I forgot to mash out ** I woke up this morning beside myself, I had not set a timer, or made a note for me to mash out...oops!!!!
I have my primary in a 6 1/2 gallon carboy with blow off tube.
Checked it this morning, no krussen yet and just a couple of bubbles in the blow off.

Earlier in the day I poured a gallon of water into my kettle and measured it with a yard stick, I did that for all 10 gallons. As soon as I started this batch, I realized I didn't use my yard stick with my false bottom in so my measurements may be ever so slightly off. The false bottom edge is only about 1/8" so there isn't a whole lot lost. Either way, I believe I am close on all of my measurements.

According to BIABacus, I am supposed to have 5.5 gallons into my primary. I know this is where adjustments need to be made with efficiency, boil off, etc, but how and where do I enter those things? Since I drained the entire kettle, how do I account for that? I don't want to do that in the future, but I was trying to maximize as much into my primary since I was going to be only 4 + gallons total. I have a kettle with a ball valve near the bottom but I don't have a pick up tube, is there somewhere in BIABacus to account for this for kettle loss? Any help to tweak my BIABacus is much appreciated.

Thanks,
Kyle
Primary: Zombie Dust Clone, 3rd BIAB
Secondary:
Bottle: Black IPA, Sock Monkey Stout, Hop Burst IPA
Wish List:12 months/12 brews

Post #9 made 13 years ago
phytenphyre wrote:but how and where do I enter those things?
Kyle, you might have missed PistolPatch's post #5 above. If that helps, type in what numbers you can and then post your BIABacus file in this thread. Treat this post as giving you permission to post the file outside the usual pre-release threads.

Well done on your first brew.
Last edited by Nuff on 23 Dec 2013, 05:32, edited 2 times in total.

Post #10 made 13 years ago
Kyle, you did a lot of things right on the brew day. :clap:

You gave two sets of numbers and was within 10.1% of each other, very good.
The gravity points;
7.5 gallons x 40 = 300
5.13 gallons x 51 = 261.63

I know it feels bad to be on the low side in the fermentor, but hey, you got 79.3% efficiency into kettle. As far as 'tweaking' the BIABacus goes, it's too early to over-ride the default evaporation rate, just take note of it on every brew. After 6 or more brews you may see a trend.

This BIABacus file. I put in the actuals you mentioned in the above post. You can record the actual finished beer and the trub losses, if interested.
BIABacus PR1.3 - Sock Monkey Stout.xls
:peace:
MS
You do not have the required permissions to view the files attached to this post.
Last edited by Mad_Scientist on 23 Dec 2013, 05:43, edited 2 times in total.
    • SVA Brewer With Over 100 Brews From United States of America

Post #11 made 13 years ago
Nuff: attached is my updated BIABacus with my numbers. I don't know what "Mash Volume" is so I put 10 gallons. I was at the brim of my pot with water and grains. I don't know what "Gravity into Kettle" is so I put 1.040. There are a couple of other things that changed in the form to just tidy things up.

MS: I haven't looked at the file you sent yet, but you will find mine here. I'll look at it as soon as I am done with this. What numbers did you use and the math to tell me I was within 10.1%? You lost me there. What does the 10% mean to you and to me? How can I use that for my next batch?

Thanks for the help!!
You do not have the required permissions to view the files attached to this post.
Primary: Zombie Dust Clone, 3rd BIAB
Secondary:
Bottle: Black IPA, Sock Monkey Stout, Hop Burst IPA
Wish List:12 months/12 brews

Post #12 made 13 years ago
phytenphyre wrote: MS: I haven't looked at the file you sent yet, but you will find mine here. I'll look at it as soon as I am done with this. What numbers did you use and the math to tell me I was within 10.1%? You lost me there. What does the 10% mean to you and to me? How can I use that for my next batch?
I used your numbers;
"Ended up with about 7.5 gallons at 202F pre-boil
Hit 1.040 pre-boil
After cooling I had about 5 1/8 gallons
Hit 1.051 after cooling in beaker"

...and plugged them into Section L and read the efficiencies in Section P.

Sorry for my strange math, I like to do that. It just shows that as homebrewers, to measure and take readings to within 10% from the beginning and ending of a brew is awesome.

This represents an amount of sugar points, sugar stays in the kettle (not evaporated).
i.e. 1.040 = 40 pts/gal x 7.5 gal = 300 pts total

Your kettle to fermentor loss (KFL) is not dead space in your kettle because of having or not having a dip tube, it means the amount of trub (solids). It's okay to add everything in the fermentor. If you do measure the KFL and VIF (clear sweet wort), then you can find out your EIF.
Last edited by Mad_Scientist on 23 Dec 2013, 06:47, edited 2 times in total.
    • SVA Brewer With Over 100 Brews From United States of America

Post #13 made 13 years ago
MS: Thanks, that makes sense. If I had 1.060, I would multiply by 60 pts/gal x (gallons) = sugar points. It's your hydrometer reading you multiply by?
Primary: Zombie Dust Clone, 3rd BIAB
Secondary:
Bottle: Black IPA, Sock Monkey Stout, Hop Burst IPA
Wish List:12 months/12 brews

Post #14 made 13 years ago
phytenphyre wrote:Nuff: attached is my updated BIABacus with my numbers. I don't know what "Mash Volume" is so I put 10 gallons. I was at the brim of my pot with water and grains. I don't know what "Gravity into Kettle" is so I put 1.040. There are a couple of other things that changed in the form to just tidy things up.
Mash Volume is simply the volume of the mash. Measure this a few minutes after you have added all your water for the mash to the grain.

Gravity into Kettle is the same thing as Gravity into Boil that PistolPatch mentioned in post#5. This is measured by mixing the wort as it comes to the boil and then taking a sample and cooling to room temperature. Once cooled, measure the specific gravity with your hydrometrer.

As you did not physically either of the above numbers, you do not have the required data and therefore should leave them blank in the BIABacus so as not to draw false conclusions. In fact, you'll need to take the five measurements mentioned in post #5 over several brews before you can make any conclusions. This post gives more information on this.
Last edited by Nuff on 23 Dec 2013, 07:24, edited 2 times in total.

Post #16 made 13 years ago
phytenphyre wrote:MS: sorry, one other question, what is the 10.1% you're comparing it to? What is the other number/data point?
Sorry, I got a number inputted in the BIABacus wrong on post #10. Disregard that file. This screen shot I attached is based on what you said in post #8. 7.4% is the difference between 79.3% and 71.9% in Section P.
Untitled.jpg
Section P is for your actual 'real' numbers, you told Nuff that, "I don't know what "Gravity into Kettle" is so I put 1.040." You would need both a volume (VIK) and a gravity reading (GIK) to find your efficiency into kettle (EIK). If you are unsure of the (GIK of 1.040), then you can't conclude anything from the measurements. You also said, "Ended up with about 7.5 gallons at 202F pre-boil - Hit 1.040 pre-boil" in post #8, that is GIK, maybe it's just the terminology?

:peace:
MS

EDIT: Corrected a quote from Kyle, "Ended up with about 7.5 gallons at 202F pre-boil - Hit 1.040 pre-boil"
You do not have the required permissions to view the files attached to this post.
Last edited by Mad_Scientist on 23 Dec 2013, 12:49, edited 2 times in total.
    • SVA Brewer With Over 100 Brews From United States of America

Post #17 made 13 years ago
phytenphyre - If you are finding the terminologies a little confusing, this guide I posted here. may help?
Last edited by mally on 23 Dec 2013, 16:14, edited 2 times in total.
G B
I spent lots of money on booze, birds and fast cars. The rest I squandered
I've stopped drinking, but only when I'm asleep
I ONCE gave up women and alcohol - it was the worst 20 minutes of my life
    • SVA Brewer With Over 100 Brews From Great Britain

Post #18 made 13 years ago
mally wrote:phytenphyre - If you are finding the terminologies a little confusing, this guide I posted here. may help?
Awesome, thanks!!
Last edited by phytenphyre on 23 Dec 2013, 21:13, edited 2 times in total.
Primary: Zombie Dust Clone, 3rd BIAB
Secondary:
Bottle: Black IPA, Sock Monkey Stout, Hop Burst IPA
Wish List:12 months/12 brews

Post #19 made 13 years ago
Mad_Scientist wrote:
phytenphyre wrote:MS: sorry, one other question, what is the 10.1% you're comparing it to? What is the other number/data point?
Sorry, I got a number inputted in the BIABacus wrong on post #10. Disregard that file. This screen shot I attached is based on what you said in post #8. 7.4% is the difference between 79.3% and 71.9% in Section P.
Great, that helps a lot!!
Last edited by phytenphyre on 23 Dec 2013, 21:18, edited 2 times in total.
Primary: Zombie Dust Clone, 3rd BIAB
Secondary:
Bottle: Black IPA, Sock Monkey Stout, Hop Burst IPA
Wish List:12 months/12 brews
Post Reply

Return to “BIAB Recipes”

Brewers Online

Brewers browsing this forum: No members and 23 guests