Ready for my first BIAB tomorrow

Post #1 made 14 years ago
Ok the recipe is set. Bought a new 62 quart/15 gallon pot. Viole bag is made to fit new pot. Yeast starter is brewing. Grain is crushed. Hops are hopin to go. But why am I so darn nervous for tomorrow. So much I decided to check the ph of my water. I checked using a ph meter that I calibrated. One test was my tap water ( that is filtered) and it showed about 7.4. Boiled about a gallon, cooled it down and checked it. It read about 8.3. So now I am worried my ph is gonna be wacko for the mash. Ugggg

Can someone tell me it is going to be ok? :). I do know it will buy I have been excited for this day for sometime. Ever since PP helped my understand the calculator and help me with the recipe.

But now I am just nervous . I have not , in my mind, had good luck with my lady few partial mash brews. They just haven't met my expectations. So now I am expecting so much more out if this BIAB. What pointers can my fellow brewers give me to help my day go smoothly?

Post #2 made 14 years ago
Best of luck for tomorrow rd :thumbs:,

Just relax and take it easy. Setting up your equipment and weighing out your grain and hops today will make tomorrow more relaxing.

I wouldn't be worried about your pH on this brew. It's something you can look at down the track. Unless you had some strange water, the high pH isn't going to give you a crappy beer. (Most places I've brewed, I sometimes forget to adjust for pH and can't tell a difference in the end result :smoke:.)

What are you brewing?
If you have found the above or anything else of value on BIABrewer.info, consider supporting us by getting some BIPs!
    • SVA Brewer With Over 100 Brews From Australia

Post #3 made 14 years ago
Its going to be OK.

My pH is also about that due mostly to permanent hardness so boiling does not remove it. My 1st brew went wrong due to equipment failure but no.2 was fine and despite the water it tasted good straight from the fermenter, its conditioning at the moment and will be ready to drink in about 3/4 weeks (its been bottled 10 days).

I shall be tinkering with the water for my next brew but don't expect the difference to be massive.
Regards

Nic

Post #4 made 14 years ago
I've been brewing for several years now and just recently (past few brews) decided I have all the important processes under control so it's time to start looking at advanced things like pH and water chemistry.

My point? RDWHAHB! The most important things for you to concern yourself with right now....but not obsess over...are cleanliness/sanitation and having fun. Brewing should be an enjoyable experience so stop worrying about the process, make some beer, and let us know how it turns out. Even the major mistakes are normally drinkable.

---Todd
WWBBD?
    • SVA Brewer With Over 100 Brews From United States of America

Post #6 made 14 years ago
Does anyone have a BIAB spreadsheet outlining the steps and a place to take notes? I have one for All grain that I got off line I am just wondering if someone has one more tailored to BIAB.

Post #9 made 14 years ago
The checklist posted on BIABrewer atm is one of mine from ages ago. I'm not sure whether to apologise or not*? I'm pretty sure I should :lol:.

Obviously it is pretty crap and primitive and not suited to many brewer's scenarios. Back when that was written, I don't think we even had any urn brewers :shock:. Anyway, enough of reminiscing...

*The reason I say I am not sure wheteher to apologise or not is because, when you look at the principle behind The Checklist, it is simply, "Think things through in advance".

This principle did help me and will help any brewer.

...

But then, I started adding stuff to The Checklist without deleting things. You see now a jumble of stuff that a new brewer should concentrate on combined with some things an advanced brewer should concentrate on. And, it's all a mess! Anyway, the good news is that cleaning up messes like that is what we like cleaning up :P. (I haven't opened The Commentary in over a year - hopefuly that will be less scary :interesting:).

...

Anyway, what I think is that for you personally, I can tell that you have read enough here for you not to be worried. I can see that you have thought things through in advance beyond the level you need to worry about. Good on you! A lot of people do no study and those that do have little good stuff to read.

Things, I think, will go really well for you.

But, what we should do, is make up a good checklist for beginners that looks at whether they are gas-fired etc etc. I can see a way of how this could be incorporated into the new BIABacus help and will inform the powers that be ;). So, great question rd :peace:.

As for you, just relax, brew and don't concentrate too much on numbers on your first brew - just record a few so as you can build up some averages.

:luck:
PP

P.S. Apologies for thinking out loud above :roll:.
If you have found the above or anything else of value on BIABrewer.info, consider supporting us by getting some BIPs!
    • SVA Brewer With Over 100 Brews From Australia

Post #10 made 14 years ago
Writing out a checklist will not only put your mind at ease, but also make things a lot easier on brew day. I wrote one for my first BIAB (which was also my first AG batch) and everything went splendid.

Enjoy!

Post #11 made 14 years ago
So the brew day seem to go very well. I am not so sure about my yeast but I don't know about that until I get home. It has been about 18 hours and I still don't see any activity. But I will check again when I get home this afternoon. I have another batch of yeast I can pitch so I am not too concerned just yet.

I took good notes on one of the brew sheets that I found on line for an All-grain. The items I want to track are pretty much the same. For the ones that were not listed I just wrote out. I will use those to help me change the spreadsheet a little. As an example, I wanted to track the dough in temp. The post 90 min mash gravity and post mash out/pre boil gravity.

I did end up with about 6.2 gallons of wort so I didn't loose as much as the recipe stated I would.

Again, thanks to all for the vote of confidence. I can't wait to try out the final product.

Robert

Post #12 made 14 years ago
Good on you Robert :thumbs:,

Sounds as though it went really well. I wouldn't worry about the yeast - it'll get going in a day or so.

The trub allowances in The Calculator are quite generous so it's not unusual to end up with more wort than you expected. Or was that because you had less evaporation than expecterd?

:salute:
PP
If you have found the above or anything else of value on BIABrewer.info, consider supporting us by getting some BIPs!
    • SVA Brewer With Over 100 Brews From Australia

Ready for my first BIAB tomorrow

Post #13 made 14 years ago
I needed up with no yeast issue. Just an issue with the brewer (that's me) not putting the lid on all the way. Of course this means no air bubbles coming out if the air lock. Once I figured that out everything is bubbling a expected.

I believe the extra wort was caused by the fact I did not have as much evaporation. I had very little turn at the end.
Post Reply

Return to “General Chit-Chat, Nonsense & Rambles”

Brewers Online

Brewers browsing this forum: No members and 53 guests