Post #2 made 7 years ago
I think they get used a lot down here in oz, particularly in party/portable keg setups. You might want to search http://www.aussiehomebrewer.com I think they get a bit of use from the guys on that forum.
Cheers
Last edited by wizard78 on 29 Apr 2011, 05:51, edited 5 times in total.
[center]"All right, brain. You don't like me and I don't like you, but let's just do this and I can get back to killing you with beer."
[/center]

[center]Homer Simpson[/center]
[center]K.I.S.S., B.I.A.B.[/center]

Post #3 made 7 years ago
Oops. I missed this one somehow.

I recently used a soda stream bottle for my portakeg setup with one of these adapters. They work pretty well, but I wouldn't recommend using them without some thread tape over the end. Also, the washer than came with mine was too thick, so I had to get a skinnier one.
    • SVA Brewer With Over 100 Brews From Australia

Post #5 made 4 years ago
+2 on the thread tape. These adaptors leak without it. I went through a full cylinder before working out that it was leaking. Since ive been taping the thread on the cylinders ive had no issues
Post Reply

Return to “Kegging”

Brewers Online

Brewers browsing this forum: No members and 1 guest