Hi all
I have an electric pot (in picture). The integrated, not immersed, heating element should be 1800W.
Pot diameter is 36.5cm, height is 28cm.
Normally I produce 12 liters of beer.
The problem is that the boiling phase isn't so vigorous.
In order to speed the such process I can use the lid. My lid has a hole of 10cm diameter.
So here my questions
1)can I use the lid to speed up the start of boiling?
2)can I use the lid during the boiling phase? Can the hole helps for DMS release?
3) In case the lid cannot be used and I should consider change the heating element.
I found for example an heating element like this (500W)
https://www.amazon.it/dp/B07BND55P7/ref ... pW2rela__c
using together 1800W+500W is equal to 2300W or this doesn't work for heating element?
Thanks
Angelo
Images
imgur.com/jGWIXx0
https://ibb.co/vY4LMTD
https://ibb.co/YXfKw5s
Increase heating power
Post #1 made 4 years ago
Last edited by Pat on 05 Aug 2019, 15:38, edited 5 times in total.
-
- SVA Brewer With Over 20 Brews From Italy
-