Chilling

1. Just wanted to share my wort chiller with everyone http://ww

   8 Replies 11821 Views

   First post by DrummoRC, 10 years ago

   First post

   ---

   

   This past weekend I decided to try a new wort chiller. I have had it for sometime now but had not trusted it :pray: . I had been using the copper tubing with a garden hose connected to it but that wasted so much water.
   
   This chiller you fill once and leave it. The new chiller does require about 25 thousand gallons of water to start with (my cement pond). :smoke: :drink: :cool:
   
   The red enamel pot is my second running I do off my primary batch - 21 litter and a 4 liter batch off the same grain....

   Last post

   ---

   

   That is a GREAT idea Lylo!!
   Thank you for the tip!
   8 Replies
   11821 Views
   Last post by OkieSeaPig
   10 years ago
2. Cube size n Co2 flush

   3 Replies 5793 Views

   First post by aamcle, 10 years ago

   First post

   ---

   

   I'm doing small batches 11 to 15 litre, I would like to 'no chill' and ferment in the cube. In the UK I have not found a supplier of 15liter cubes but I can get 20 litre cubes.
   
   20liters would either leave a lot of head space or I would have to squash the cube a lot to get the volume down..
   
   I have a Co2 bottle would it be OK to fill a 20litre cube to say 10 litres with hot wort flush the headspace with Co2 seal the cube and proceed as usual, sterilising the cube etc.
   
   Atb. Aamcle
   
   ATB....

   Last post

   ---

   

   Picked up 2 x 20liter cubes this afternoon.
   
   Aamcle
   
   ATB. aamcle
   3 Replies
   5793 Views
   Last post by aamcle
   10 years ago
3. Hey no chillers - I am looking for your help

   10 Replies 11064 Views

   First post by Indieg, 10 years ago

   First post

   ---

   

   I am wondering how to adapt the following hop schedule for no chill. Thanks!
   
   Hops
   
   NAME AMOUNT TIME USE
   Amarillo 0.75 oz 60 min First Wort
   Amarillo 0.75 oz 15 min Boil
   Amarillo 0.5 oz 5 min Aroma
   Amarillo 1.0 oz 0 min Aroma

   Last post

   ---

   

   mally,
   
   Just out of curiosity Bob/Lylo. When you add hops to the cube, do you do so loose or in a sack?
   Also, what do you do when it comes to fermentation? filter or just pull the bag out?
   
   I have thought about no chill hopping, but I would feel the need to squeeze the bejeesus out of those hops to get my wort back.
   
   It depends? If I am brewing a malty beer that only uses a bittering hop. I dump it into the wort as FWH (First Wort Hop) I don't see the reason to use a sack or anything else. I...
   10 Replies
   11064 Views
   Last post by BobBrews
   10 years ago
4. what type of cube are you using?

   47 Replies 45856 Views

   • 1
   • 2

   First post by Lylo, 13 years ago

   First post

   ---

   

   What type of cube are you using?I like the idea of the collapseable type, but all I can find are 20 liters,is this what you are using or the hard sided type?

   Last post

   ---

   

   I know the videos, i wached the on youtibe before. I have to wait until i go to a store to see woth my own eyes what it says on the cubes. The online store just don't have enough info...
   
   Edit:
   I bought a cube, is a 20 liter canister, with the HPDE symbol on the bottom (no number though...i guess is optional).
   1 - The walls doesn't feel to thick, could that be a problem?
   2 - Also, the cap doesn't say what plastic is made of... should i be concerned, or is self explanatory that is the same...
   47 Replies
   45856 Views
   Last post by bionut
   10 years ago
5. Best way to transfer to cube

   12 Replies 13543 Views

   First post by Tsar, 11 years ago

   First post

   ---

   

   Hi guys,
   
   I couldn't find the answer to my question.
   
   What's the best way to transfer the boil to the cube? Is it safe to use the tap in my Pot? Should I use a hose in it? Or let the boil drop directly to the cube?
   
   Thanks :think:

   Last post

   ---

   

   I use a 1m length of silicone hose attached to the ball valve on my keggle to transfer to the cube. The valve itself is capable of being fully disassembled and is cleaned thoroughly after every brew day
   12 Replies
   13543 Views
   Last post by pist
   10 years ago
6. Side by side no-chill versus chill experiment.

   45 Replies 40678 Views

   • 1
   • 2

   First post by PistolPatch, 12 years ago

   First post

   ---

   

   Due to some kegs I bought with faulty welds, over the next few months, I have to completely empty my keg fridge (half a keg left), buy 8 new kegs (that I trust and fit in my fridge :roll:), re-tube the fridge and then fill the kegs.
   
   Seeing as I have two kettles that can handle a double-batch, recuperating from this keg disaster might allow for some interesting research opportunities for us.
   
   My Previous Practices
   
   I can only temperature control two fermentors at once so previously I have...

   Last post

   ---

   

   Homemade, so sorry it has taken me a few days to reply. I think the results from that particular trial can be found in this post . You'll see that there is nothing definitive.
   
   In some thread, somewhere here, is a post related to this whole subject where I talked about how chill time can commence quite some time after flame-out depending on the brewer. On the weekend, just before you posted above, I finally got some straight answers on this form a pro brewer. The next post I do today will be on...
   45 Replies
   40678 Views
   Last post by PistolPatch
   11 years ago
7. What is the longest you have stored wort in the cube?

   9 Replies 10414 Views

   First post by BobBrews, 11 years ago

   First post

   ---

   

   What is the longest length of time you have stored un-fermented wort in a no-chill container?
   
   I have done only 4 months. How long for you or your friends? :think:
   
   I brewed a beer and stored the wort four months. I re-brewed the exact beer and fermented them side by side. I tasted the wort at bottling and they seemed identical? Any thoughts?

   Last post

   ---

   

   shibolet,
   
   I know the feeling. I will be brewing a double batch of it when I get back from the NHC. I ran out a while back but didn't want to waste it by brewing it until I get my sense of smell back! I am starting to smell flowers and hops when I open a bag. All beer still tastes like (Bud Lite) to me. The NHC this week will be a bust unless I find some sour beers that I can really taste! Oh Well?
   
   P.S. My wife says that I don't smell any better? :whistle:
   9 Replies
   10414 Views
   Last post by BobBrews
   11 years ago
8. Chilling Ideas

   12 Replies 11085 Views

   First post by GuingesRock, 11 years ago

   First post

   ---

   

   Dustinj,
   
   I have two large kettles (70L versus your 50L) and I chill and no-chill. Both methods have advantages and disadvantages. If you have an immersion chiller and are single batching, I would advise using it especially when starting out.
   
   The immersion chiller you have built is a great investment. I would advise you to ignore no-chilling for now unless you get in a situation where you don't have a fermentor available to pitch immediately.
   
   An immersion chiller offers many advantages not...

   Last post

   ---

   

   Thanks Joshua, I was hoping some version of it might have some use for somebody.
   
   Does anyone else have any chilling ideas? There’s a lot on here about the no-chilling discovery. It’s time poor old chilling got some attention.
   12 Replies
   11085 Views
   Last post by GuingesRock
   11 years ago
9. no chilling was a bit scary

   17 Replies 16976 Views

   First post by uk brewer, 11 years ago

   First post

   ---

   

   i put the brew 20+L
   in to the cube , it was very hot and the cube was a bit wobbly,
   
   did i put it in too hot, or is this normal,
   
   the cubes are food grade and quite thick
   
   heres a couple of piccys, you can see the full cube has taken on an expanded look
   
   the trub has settled nicely...

   Last post

   ---

   

   You say that they are food-grade, but are they HDPE (high density poly ethylene)?
   
   As I understand it, HDPE is rated for hotter-than-boiling temperatures, but not all food-grade containers are made of HDPE, so that is something important to check.
   
   As to your question, I have noticed my cubes swelling a bit from the heat of hot wort, but your cubes look a little dimple-y (for lack of a better term) and look like the plastic is melting a little.
   
   I would check on their material and make sure it...
   17 Replies
   16976 Views
   Last post by uk brewer
   11 years ago
10. ANHC Chilling Experiment IC, Counter Flow, No chill

    8 Replies 9897 Views

    First post by BobBrews, 11 years ago

    First post

    ---

    

    James Spencer of Basic Brewing Radio and Chris Colby, editor of Brew Your Own magazine, join in an experiment at the Australian National Homebrew Conference to test chilling techniques.
    
    System Wars Video :champ:
    
    Audio Podcast :champ:

    Last post

    ---

    

    The Green Bay Packers are the best team...eah oh wait. The Rackers are the Green Bay Brew club! Go Rackers! Your the best!
    8 Replies
    9897 Views
    Last post by BobBrews
    11 years ago
11. Plate Chiller - My new score.

    11 Replies 10533 Views

    First post by Aces high, 11 years ago

    First post

    ---

    

    I scored this plus a second plate chiller at work today. This one is about 14 plates and the 2nd one about 25, but its got a sligtly damaged inlet port. They were about to go to the scrappy before i saved them. They're quite large compared to standard brewing type units (see the comparrison to the keyboard) and have what looks like 1 1/4 or 1 1/2 inch (1.5 in = 3.81 cm) inputs. They have never been used and have been sitting on a shelf for about 5 years. The inside is all shiny as the caps have...

    Last post

    ---

    

    Dont worry yeasty, I had the thing in my hands and I was thing the same thing, then it finally clicked :scratch:
    
    Now i am trying to work out how they would attached a pipe to that side. The water side has a screw thread on the outside which I can work with
    
    It all depend upon what they were used for with regard to the cooling side fluid. I'd expect if it was nasty stuff the fitting would have to be welded. For your needs a large jubilee clip would do it if you can get a hose to fit over the...
    11 Replies
    10533 Views
    Last post by Yeasty
    11 years ago
12. First no chill and well chuffed.

    23 Replies 19624 Views

    First post by Yeasty, 11 years ago

    First post

    ---

    

    Brewed today and No chilled for the first time. Apart from the saving in time I found it so much easier due to not having to be ultra careful about sanitation like you do with chilled wort. Boil end, 20 minute settle and syphoned whilst still piping hot.. :shoot:
    
    First time I'd used my syphon with hot wort and it performed perfectly. I think I might have to develope a system to start it off. Today I used a long length of tubing and some careful suction, watching for the hot wort and stopping...

    Last post

    ---

    

    The washers in there all right. I must check the ridge, but I don't know if I'll be trying nc again. Kinda put me off
    
    Don't give up Lars, If i think of all the problems I had with that pressure barrel I should have given up brewing :argh:
    
    Saying that if you are happy to chill and pitch the same day I can't see any advantage. I liked it cos it removed that fumbling/hurried period of time when all you want to do is get finished (and pissed). It splits your brew day into more manageable...
    23 Replies
    19624 Views
    Last post by Yeasty
    11 years ago
13. Cube Purchase Recommendations

    1 Replies 4257 Views

    First post by ynotnamlac, 11 years ago

    First post

    ---

    

    Anyone recommend a place to buy around Sydney. I was going to do mini-biab, so a smaller container would be need perhaps? Thanks

    Last post

    ---

    

    You could try your LHB shop and if you no luck there, try some camping stores. They are in Bcf and stratco and bunnings up here in brissy. You could also purchase a FWK off craftbrewer or another store that sells them and keep using it for your cube.
    1 Replies
    4257 Views
    Last post by aydanrogers
    11 years ago
14. Join our chilling collaborative experiment!

    1 Replies 3669 Views

    First post by BobBrews, 11 years ago

    First post

    ---

    

    August 2, 2012 - Chilling Experiment
    James, Andy Davison of the Australian National Homebrew Conference, and Chris Colby, editor of Brew Your Own magazine launch a collaborative experiment to test the effects of different wort chilling methods.
    
    Show recording below!

    Last post

    ---

    

    Those collaborative experiments are a great idea Bob. Couldn't find the form though for the chilling experiment. Only saw the form for the primary/secondary experiment :scratch:.
    1 Replies
    3669 Views
    Last post by PistolPatch
    11 years ago
15. Basic Brewing Radio: No Chill Experiment

    9 Replies 10358 Views

    First post by shibolet, 12 years ago

    9 Replies
    10358 Views
    Last post by BobBrews
    12 years ago
16. No-Chill Cube? Fermenter?

    30 Replies 30589 Views

    • 1
    • 2

    First post by DABEER, 13 years ago

    First post

    ---

    

    Just another NOOB to BIAB. Lot's of Kits though behind me. I don't know if anyone has used these for a No-Chill Cube but they are HDPE but with a large mouth (ease of cleaning concern). I am currently awaiting a follow up email from the company to see if it can handle the temps (100C/220F) of boiling Wort being poored directly into them for overnight cooling. I would think it could handle it due to the fact HDPE is HDPE, I might add that it is thick walled also, very sturdy. It's from a company...

    Last post

    ---

    

    All,
    
    Earlier in this thread I said....
    I bought extra screw caps to fit them with a air lock. The idea was to use the No Chill containers as a extra fermenter. I still haven't done that! I rarely have more than 3 buckets fermenting at a time. I thought the the cleaning would be difficult but not hard to do infrequent as it would be done.
    
    I brewed and No Chilled a Black IPA on this past St. Paddy's day. The next day (or so) I added the yeast to the N/C cube (now fitted with a air lock)....
    30 Replies
    30589 Views
    Last post by BobBrews
    12 years ago
17. I'm aging my cube!

    5 Replies 7774 Views

    First post by housecat, 12 years ago

    First post

    ---

    

    Following on from my comments Here , I thought I should pull my finger out and do something about it!!
    
    The wort is from a coopers Pale Ale that I did back in January. This is the 1st cube of a double batch that I did on the day in question. The 2nd one has already been fermented and bottled. I'll be keeping a couple of bottles of this to compare it one day down the track when I ferment the 1st cube. Although, I don't know how true the comparison will be due to the aging in the bottle etc. But...

    Last post

    ---

    

    Hey Stux,
    
    Thanks for the pep talk :D just so you know, I hadn't lost the faith, it was more of a tongue in cheek post :P
    
    You are right, none of the posters on AHB actually did it on purpose and none of them have shown any tasting notes or side by side tastings, that have been reported.
    
    I am going to do this experiment and keep a couple of bottles from the first batch so hopefully it can be as true side by side testing as can be allowed, under the circumstances.
    We have a case swap here in...
    5 Replies
    7774 Views
    Last post by housecat
    12 years ago
18. Improving wort through storage.

    15 Replies 14525 Views

    First post by hashie, 12 years ago

    First post

    ---

    

    After having the same question asked in 2 different threads, I would like to pose the following question for discussion;
    
    Does storing fresh wort (slow/no-chill) in a sealed cube improve the finished beer?
    
    My initial thoughts are that it is entirely possible.
    
    We know that the sugar (maltose) will remain constant. Therefore the Gravity will/should remain constant.
    The volume will remain constant, assuming a proper seal.
    
    Is the wort alive? Once fermentation starts we have live beer and it...

    Last post

    ---

    

    Of course, then you'd had to do an experiment on chill vs freeze ;)
    So many ways to make and drink beer, so little time :thumbs:
    15 Replies
    14525 Views
    Last post by hashie
    12 years ago
19. No chill question

    10 Replies 11995 Views

    First post by Ivesy, 13 years ago

    First post

    ---

    

    Done our fist beer in a while the other night, all went well, brewed and then straight into no chill cubes. As we do a batch each, we both stuck our cubes in the fermenting fridge out of the way. The next day we smacked our yeast in preperation to pitch, then went to the fridge to get our cubes out and realised we made a massive mistake, we closed the fridge door overnight with the boiled brews in there and they were still hot the next night! I took them out and stuck them into pool to get them...

    Last post

    ---

    

    ...and we haven't even begun to discuss hopping options with no-chill vs chill. :argh:
    
    I would love to read a thread on this subject. Someone smarter needs to start it, please. (that would be anybody)
    10 Replies
    11995 Views
    Last post by Horace
    12 years ago
20. no chill leave it in the kettle

    8 Replies 15816 Views

    First post by jfranklin6, 13 years ago

    First post

    ---

    

    I have only done one beer this way, a hefeweizen, and it tastes good, different from the only one I have done before, extract with dry yeast, this one was biab and white labs hefe yeast. My next beer is going to be a kolsch, has anyone done a pils or so in a biab no chill style? And what do you think about leaaving it in the kettle, just till the next day though.

    Last post

    ---

    

    What about two ten litre containers sanitised with starsan that way you reduce back injury and easer to store in fridge to cool to exact pitching temp.
    JC
    8 Replies
    15816 Views
    Last post by Yak52
    12 years ago
21. Berliner Weisse and No-Chill

    10 Replies 10404 Views

    First post by shibolet, 12 years ago

    First post

    ---

    

    I'm looking into brewing a Berliner Weisse,
    most recipes call for a very short boil or non at all.
    can i boil for 15 minutes and than no-chill in my cube? will this not cause DMS or other problems?
    any thoughts?

    Last post

    ---

    

    True enough,I like giving them a poke once in a while too and quite often post links to here for people looking for BIAB info.
    10 Replies
    10404 Views
    Last post by Lylo
    12 years ago
22. Stainless Steel No-chill Fermenter?

    6 Replies 9902 Views

    First post by odi3, 12 years ago

    First post

    ---

    

    Does anyone ferment in their no chill container? I am thinking if i switch to a stainless steel fermenter, i could ferment in the same container i no chill in.
    
    Maybe like a pony keg sanke keg?

    Last post

    ---

    

    I pressure ferment in a s/s 5 gallon corny. If you don't like the idea of pressure, you can do a regular ferment with a blow off tube. I have some photos of what I've been doing with BIAB and pressure fermenting since May 2011, below...
    6 Replies
    9902 Views
    Last post by Mad_Scientist
    12 years ago
23. Speeding up immersion chilling through wort agitation.

    10 Replies 10577 Views

    First post by PistolPatch, 12 years ago

    First post

    ---

    

    Just had a look at this video . At about 2 mins 20 secs, you'll see an electric stirrer being used to stir the mash. At 5 mins 20 secs, it is being used to stir the wort during the chill.
    
    While I think continual electric stirring of the mash is a bit over the top, I've always wanted something to stir the wort while immersion chilling as it does speed things up a lot.
    
    The only idea I've had is to add some sort of impeller driven by the water running through the chiller but I have never worked...

    Last post

    ---

    

    Yeasty: LOL about shopping in diusguise. I'm amazed you've heard of the sprinkler ban. (Where do kids play these days? :)). I can't see how the sprinkler would work unless I wanted to chill and dilute simultaneously :lol:. In other words, where's the output water going to go? (Like the way you're thinking though Yeasty).
    
    Yea my thinking was a bit random on that idea. :headhit:
    
    A normal pump will rotate if you just run water through it,I've seen it happen at work a few times. If you could...
    10 Replies
    10577 Views
    Last post by Yeasty
    12 years ago
24. Best time/temp to cube

    17 Replies 15377 Views

    First post by lambert, 12 years ago

    First post

    ---

    

    I've been using NC cubes for my last 5 brews and something has always bothered me. At what stage do you start the transfer of the hot wort to the cube? I've always done it as soon as possible after flameout (within 5-10 minutes) which means that I'm getting a lot of break material into the cube. I'm scared that if I leave the wort for too long (wirlpool or waiting for break material to settle) then it will not be hot enough to sanitise the cube.
    I normally leave this break material, or most of...

    Last post

    ---

    

    thats impressively craptacular :thumbs:
    17 Replies
    15377 Views
    Last post by Aces high
    12 years ago
25. What are you guys using in New Zealand?

    4 Replies 7821 Views

    First post by Leisure Master, 12 years ago

    First post

    ---

    

    Hello all,
    
    Looking to source some cubes in NZ and was wondering what locals here use? I'm new in country so not really sure where to look.
    
    Cheers!
    
    T

    Last post

    ---

    

    Most Mitre10 stores have stacks of them too, in a couple different shapes so you can choose one to fit your situation.
    Where in NZ are you LM??? You'll have to update your Location in your profile ;)
    4 Replies
    7821 Views
    Last post by hbnath
    12 years ago