Electric BIAB

1. Anyone else using a 20L urn?

   2 Replies 5583 Views

   First post by Tanga, 12 years ago

   First post

   ---

   

   Is there anything specific I need to know... besides the smaller batch sizes. :evil:
   
   I'm looking forward to this. All I need is the swiss voile for my grain bag and a thermometer (and a free fermenter) and I'm set to go. I've enjoyed steeping and adding my own hops. This next step looks even more fun.

   Last post

   ---

   

   Yeah, I saw that Ralph. Cheers. The smaller batch sizes aren't really a problem (in fact, considering my limited space they are probably going to be a blessing). But it is good to know that a full sized batch is doable. I was going to start with a pale ale, so I could go maxi for that. I don't know yet. I want to ease into AG. I saw your urn. Nice score.
   
   Thanks Joshua. I have been reading through the forums. I think some kind of lagging (plus wool blanket) might be the go, but I'm not sure...
   2 Replies
   5583 Views
   Last post by Tanga
   12 years ago
2. BIAB trolley 'rigs' for electric brewers

   4 Replies 7922 Views

   First post by Cameron, 12 years ago

   First post

   ---

   

   My BIAB setup consists of a 30L Birko urn which sits on top of two milkcrates, underneath a pulley with a cleat on the wall. This system works great but there's something that I want to tweak.
   
   Sometimes the urn may not be completely centred underneath the the pulley. In this case the bag comes out slightly off centre and I slide the milkcrates over a tad. When I have over 20L of mash at 78 degrees an accident at this point could be bad. I've been looking at all the different BIAB stands and...

   Last post

   ---

   

   No I'm still using the milk crates and waiting to run into a bargain somewhere...
   4 Replies
   7922 Views
   Last post by Cameron
   12 years ago
3. I Call it Brewus Maximus

   4 Replies 6662 Views

   First post by DK1, 12 years ago

   First post

   ---

   

   Thought I would share my shiny new setup.
   20110625-140358.jpg
   It’s a 120L aluminium pot with a SS 2 piece ball valve.
   Coming from a 40L pot that has served me well over the past 4 years, and since I am brewing more and more I thought it was time for a BIG upgrade!
   
   Happily I can report that my first brew was a total success, I brewed JZ's mild from Brewing Classic Styles using a combination of The Calculator and BeerSmith 2.0 (after seriously setting it up properly for BIAB, thanks to...

   Last post

   ---

   

   Hi,
   yep I have a 2:1 pulley to get the bag out without breaking my back.
   No chill in a couple of 20L cubes and ferment in a 60L fermenter, which just fits in my fermenting fridge!
   
   Cheers
   
   DK, could you please post a picture of your 2:1 pulley?
   4 Replies
   6662 Views
   Last post by shibolet
   12 years ago
4. belgian tripel advice - in 40l urn

   2 Replies 5514 Views

   First post by bcp, 13 years ago

   First post

   ---

   

   my holy grail of brewing is piraat ale, the most sublime drink on the planet. So why wait, have a shot at it. It's a monster with 1.101 OG.
   
   So i'm thinking of ways to achieve this:
   1. Use LDME to help achieve OG because urn is too small : I figure i'm not going to fit 8 kilos of grain and will seriously compromise efficiency with so much grain in the urn. So, i'm thinking i'll mash with a large base of pilsner & speciality grains, but then also buy some DME and top it up to get to the 1.101...

   Last post

   ---

   

   Hey BCP
   
   Hope you can sort this one out. I have no advice, but would be interested in how it goes. Am partial to the Belgian ales, and would like to do a dubbel or tripel. :luck:
   
   Cheers
   
   BD
   2 Replies
   5514 Views
   Last post by big dave
   13 years ago
5. New twin Urn System

   15 Replies 17788 Views

   First post by Beachbum, 13 years ago

   First post

   ---

   

   Urnest and Urnold do Wort
   
   I was fed up with spending five or six hours and only getting a cornie plus 4 bottles out of it, so I bought a second electric urn (and bag and hopsock) to do double batches (or two different batches) in little extra time, by slightly staggering or offsetting the two brews. Instead of sitting around waiting for the next stage, I was running around like a blue arsed fly for a few hours. Great fun.
   
   First sea-trials today for the new system. Two 40 litre urns...

   Last post

   ---

   

   i waited for one of my brewing mates to try it first. it works great. balls are in-tacked.
   no modification required.
   15 Replies
   17788 Views
   Last post by shibolet
   13 years ago
6. Crown urn modifications?

   8 Replies 11339 Views

   First post by el Tono, 13 years ago

   First post

   ---

   

   Hi all,
   
   I have just bought a 40 l Crown Urn to begin AG brewing using BIAB.
   
   Does anyone recommend replacing the tap with a s/s ball valve? Any technical tips on how to do this?
   
   What about the sight glass? Seems like a potential bug trap after a few brews. Is it worthwhile to remove it and plug the holes - or even insert a mashmaster thermometer in the lower hole?
   
   Cheers,
   
   Tony

   Last post

   ---

   

   I will clamp it as I had to hold it the whole time urn was draining as it kept slipping.
   8 Replies
   11339 Views
   Last post by sean
   13 years ago
7. Yeti's First BIAB

   10 Replies 12419 Views

   First post by yetiboy, 13 years ago

   First post

   ---

   

   I made my Bombay Punk IPA on saturday, my 1st BIAB.
   I did all the measuring that was on the checklist and have filled in the details on the calculator as much as I can. I worked out my evap per hour was less than avg probably because I had the lid half on during the boil.
   My efficiency figures seem way out as does my start of boil volume - could this be because i measured the volume at 79C?
   Anyway I took a couple of photos when i wasnt too stressed lol.
   I've tried to attach my calculator if...

   Last post

   ---

   

   Ah cool - makes sense now. Thanks :)
   10 Replies
   12419 Views
   Last post by yetiboy
   13 years ago
8. My First BIAB (UK)

   11 Replies 12565 Views

   First post by Cotti7, 13 years ago

   First post

   ---

   

   Hey all popped on to say thankyou for all the information I have gleaned from this site and to share my first expierience of BIAB with you!
   
   The recipe was the NRB APA things went well till the thermal protection on my extension lead cut in (I hadnt unwound the cable fully) it only took 5 mins to get things moving again.
   
   I am struggling to work out my efficency if anyone can help or point me in the right direction please do!
   
   Pre Boil vol=28 litres, Pre Boil...

   Last post

   ---

   

   Ive left it bog standard atm :)
   11 Replies
   12565 Views
   Last post by Cotti7
   13 years ago
9. my new refurbished electric boiler.

   16 Replies 15089 Views

   First post by shibolet, 13 years ago

   First post

   ---

   

   hi all,
   i picked up this old boiler that had been sitting in a junk yard for ages. it holds apx. 68 liters and has insulated side walls.
   
   i cleaned it as best as i could and had a friend rewire it for me.
   it has three 1500W heating elements but we only wired two of them because house won't carry 4500W on one outlet.
   it has three ports - one on each side and one drain on the bottom center.
   i have not brewed with it yet.
   i need some brainstorming help: the side ports are very far from the...

   Last post

   ---

   

   Beautiful :)
   16 Replies
   15089 Views
   Last post by stux
   13 years ago
10. Bag design with probe in bad position

    7 Replies 11100 Views

    First post by yetiboy, 13 years ago

    First post

    ---

    

    Ive reposted here as PP said you guys with electric elements have similar problems and may come up with an answer?
    
    Hi I am thinking about a bag for my brewpot and have issues with a thermometer probe – I presume it will catch on the bag as I’m pulling it and rip a hole.
    Thermo probe is 33cm down from top of pot and sticks out 14cm. (pot is about 50cmx50cm)
    I could make a shortened bag that sits in top half of pot only – I would lose mashing volume here and lose efficency maybe? A member of the...

    Last post

    ---

    

    I think I may have sorted my problem. I found a small diameter but deep sieve with a cranked handle, I bent it more so that the handle can act as a retainer on the thermometer retaining nut. The sieve now sits neatly over the probe:) I can use a normal sized bag now.
    Cheers
    7 Replies
    11100 Views
    Last post by yetiboy
    13 years ago
11. Electric BIAB newbie questions

    6 Replies 8223 Views

    First post by JohnvanDyk, 13 years ago

    First post

    ---

    

    Hello,
    I was wondering if there is a chart somewhere translating the number of cups a coffee urn makes to the volume of liquid it actually holds? The largest urn I've found so far in my searches has been a 100 cup urn but I'm not really sure what that gives me in litres/gallons.
    Also, is there any issues with the bag in the BIAB setup touching the element in an electric system and melting? Or do you just make sure that keep the bag high enough above the element that it won't melt?
    
    Thanks,
    John

    Last post

    ---

    

    G'day JVD,
    I would say you need to go bigger unless you wish to do a mini-biab or maxi-biab.
    
    One of the biggest pains when converting imperial to metric is in volumes. If you don't know where the original volume came from, ie US gallons or Imperial gallons etc, then you may end up with the wrong result.
    And as noted above, it would seem that simple things I take for granted like a 1 cup measure can be different the world round. :nup:
    Sorry for the rant, hopefully it can help you to determin...
    6 Replies
    8223 Views
    Last post by wizard78
    13 years ago
12. My BIAB setup

    21 Replies 23796 Views

    First post by EoinMag, 13 years ago

    First post

    ---

    

    I have done a few brews now that were partial mashes, using the BIAB technique and topped up with Muntons DME to make my OG.
    I was using a muslin bag until I found this website and recently had the wife knock up a voile bag with a drawstring and that will shortly be used for my first complete all grain brew.
    
    I have a 75l Brupaks boiler with 6KW of power comprising of 2 3KW elements which I lagged myself with radiator lagging bubblewrap. I find that when wrapped in a sleeping bag on top of this...

    Last post

    ---

    

    Hi Ian,
    Hashie started a thread on it here
    An interesting thread and idea.
    Cheers
    21 Replies
    23796 Views
    Last post by wizard78
    13 years ago
13. Hecla 55? L Urn on Ebay

    0 Replies 6791 Views

    First post by stux, 13 years ago

    

    Thought someone might be interested
    
    Dunno how big it is...
    0 Replies
    6791 Views
    Last post by stux
    13 years ago
14. Barley Belly's Biab Brewrig

    16 Replies 20482 Views

    First post by Barley Belly, 13 years ago

    First post

    ---

    

    Just upgraded my old 3V system to a single vessel BIAB 40ltr Urn and are yet to crack my cherry.
    
    In keeping with the tradition naming brew setups I have christened mine Grunt Brewko the Mighty BIAB Urn or just Brewko for short. :smoke:
    
    Got a Gryphon grain bag ready to go and are just waiting on Craftbrewer to send me my hop bag and some new silicone hose and I'll be ready to kick her in the guts. I also lashed out on a staino mash paddle and a staino sifter to use as a false bottom so I can...

    Last post

    ---

    

    It just keeps getting better, :clap: Is there no end to all this bling :party:
    I've shown the pics to SHMBO and all she said was one word,, NO! :argh: Looks like I'm gonna be stuck with my dull ally stock pot for a while :sad:
    16 Replies
    20482 Views
    Last post by Yeasty
    13 years ago
15. dead space under the false bottom in an electric boiler

    2 Replies 5269 Views

    First post by shibolet, 13 years ago

    First post

    ---

    

    question: if i have a rack or other false bottom to keep my bag off the heating elements, do i not create a dead space under the rack that will have a higher temperature than the mash above the rack?

    Last post

    ---

    

    the element is meant to shut itself off if anything touches it besides liquids.
    2 Replies
    5269 Views
    Last post by shibolet
    13 years ago
16. Barley Belly's Maiden Biab Brew Day

    20 Replies 23729 Views

    First post by Barley Belly, 13 years ago

    First post

    ---

    

    After 26 2V/3V AG brews under my belt I decided to take the step up to BIAB and I have the pictures to prove it.
    
    WARNING:- There are heaps of pictures
    
    Here is a brew log and some pictures of my cherry poppin maiden Biab brew day for your pleasure/critique (feel free to comment on any improvements I can make or mistakes I might of made):-
    
    12.45PM Fill to 32ltr 26 degrees celcius water, urn temp control 110c, 2400w handheld in, lid on
    12.55PM Water 50C
    1.05PM Water 70C
    1.10PM False bottom...

    Last post

    ---

    

    MODERATOR NOTE
    We should split the bag draining into another thread :)
    
    A very sensible suggestion stux. I commenced splitting this topic but realised it would require several hours of editing individual posts etc to make a 'smooth' read. Instead I have started a new topic here .
    
    This is the best I can do. Hopefully those of you who have written above on the subject of bag draining will edit and copy some of what you have written here to the new thread.
    
    To prevent this sort of thing...
    20 Replies
    23729 Views
    Last post by Nuff
    13 years ago
17. Fridgemate to control mash temp

    2 Replies 5310 Views

    First post by Bec26, 13 years ago

    First post

    ---

    

    Evening all
    
    Hopefully starting my maxi BIAB in the next cople of days.
    
    Rather than lagging the urn, can I use a fridgemate on heat mode to keep the urn at mash temp?
    
    My bag will be a good 5-10cm clear of the element is this far enough to stop it burning?
    
    If the answer is yes to both . . .
    
    1. BIAB just got a lot easier and . .
    
    2. I need to buy another fridgemate
    
    Thanks in advance
    
    Bruce

    Last post

    ---

    

    Yeah, you can indeed do that Bruce, but if you're just starting I'd look to keep it as simple as possible. I know its a fairly simple process, but you don't need any more complicating factors when you're doing your first few MaxiBIABs.
    I've noted the lagging does do a terrific job though, I recommend using two separate layers and pre- heating everything, then it maintains a consistent temperature and doesn't require stirring, if you heat with the element it will require stirring. I've noted...
    2 Replies
    5310 Views
    Last post by Ralph
    13 years ago
18. q's about my first BIAB brew session

    13 Replies 14163 Views

    First post by kristfin, 13 years ago

    First post

    ---

    

    hi all,
    
    i'm planning my first BIAB brew tonight or tomorrow. i've brewed over 30 batches of all grain and several extract ones so i'm not stranger to brewing.
    
    that said, after having looked at the calculator supplied here, i have some questions.
    
    here is the recipe, equipment and method aside.
    
    Pilsner 93,00 %
    Carapils 4,00 %
    Caramunich II 2,00 %
    Caraaroma 1,00 %
    Northern Brewer Pellets (60 min) 33,5 IBU
    Goldings, US (20 min) 3,3 IBU
    Goldings, US (5 min) 1,6 IBU
    
    my equipment is a 50...

    Last post

    ---

    

    i heated up 32 liters.
    i'm not sure about the time it took, since i just set the controller to 72°C and prepared dinner.
    i guess it took some 20-30 minutes from 8°C.
    then i stirred the grain in and closed the lid for 5 minutes, to heat it up.
    stirred more until the temp was 67°C and then gave it 70 minutes.
    
    the heating element is 5.5kw and the boiler is pretty well insulated. at least compared to my old boiler it is much faster. most of my time, earlier, was spent waiting for it to boil.
    13 Replies
    14163 Views
    Last post by kristfin
    13 years ago
19. My boiler

    4 Replies 6460 Views

    First post by peacock_suit, 13 years ago

    First post

    ---

    

    Iv have tested this out with an extract brew and it hold up to a boil without any problems at all.
    
    Some pics here:
    
    Ignore the markings on the side, its temporary felt tip pen :blush: .
    Its a 60l food bucket with made of 2mm thick food grade plastic. They have been used by lots of ppl successfully already which is why I chose it.
    The heating element is 3kw and is designed for domestic immersion boilers.
    
    I need your help to understand something before I embark on an all grain BIAB brew with...

    Last post

    ---

    

    I would say, the way I would go is that if you could get yourself some perferated s/s (or something similar) just a touch smaller than the inside diameter of the boiler, and have some legs welded onto it so it sits above the element.
    This should work. :think:
    If it doesn't bend around the element, there will be some virgin water . I don't know if that is bad or not, but IIRC that is sub-optimal.
    Fair call, would a more regular stirring of the mash fix that issue? I guess you could just have...
    4 Replies
    6460 Views
    Last post by wizard78
    13 years ago
20. SS vessel

    3 Replies 5903 Views

    First post by nik, 13 years ago

    First post

    ---

    

    I am a little bothered when using my gas fired pot and I am looking a more versatile and space saving solution . I have found in my local market stainless steel vessel is provided in two volumes 75 and 50 liters . I am fond of the 75liter one but my concern is that they are not pressure formed like kitchen pots they are welded on the side and I believe the bottom part is then pressure crimped to the side part (they sold as olive oil or wine using a special cover storage container so are they...

    Last post

    ---

    

    I have to agree with you with the bottom that's the part I am aware of as it is maybe is sturdy but when heat is envolded I am not sure what is gona happen with the physical thermal shrinking of the material .
    I will look more on same type of vessels to find something more appropriate I believe the material thickness is not a problem I think the UNRs maybe they are using the same thickness so not much trouble.
    If something came up I plan to insulate it permanent with an appropriate material to...
    3 Replies
    5903 Views
    Last post by nik
    13 years ago
21. Planning my setup

    14 Replies 14707 Views

    First post by peacock_suit, 13 years ago

    First post

    ---

    

    Hi. I am hoping to get a bit of feedback and advice. If I tell you my plans perhaps some people may care to give me they're opinions and thoughts.
    
    I am hoping to make a boiler out of a 25L fermentation bucket fitted with 2 x 1kw kettle elements, these:
    
    When completed it should look something like this one:
    
    I plan to use insulating material to help maintain temperature for mashing.
    what Iv noticed is that unlike in the UK where these sort of diy boiler set ups are popular, most of the...

    Last post

    ---

    

    Happy day's then! will get this sorted next week when I get some dosh :).
    14 Replies
    14707 Views
    Last post by peacock_suit
    13 years ago
22. Ebay Urns, quality issues, how well they work and mods

    8 Replies 11938 Views

    First post by Skinah, 13 years ago

    First post

    ---

    

    I just purchased a 30L brand new chinese made URN from ebay for $125 delivered to my door as I am looking to hear if anyone else has modified their urns with the ideas that I am considering.
    
    First of all I have disabled the boil dry thermostat and left the temperature dial control working, and done 1 brew and found the urn to work great with 1 draw back. The boil is very vigourous with wort jumping up 7-8cm high so I have to keep manually turning the urn down and back up again as the urn has a...

    Last post

    ---

    

    Result is the URN is now safe to use on a 10amp circuit and can still produce just enough heat with the control turned up to 110 and the lid off. Right then... No more excuses, go and make beer :D
    8 Replies
    11938 Views
    Last post by widdley
    13 years ago
23. BIAB Brew Rig

    10 Replies 13278 Views

    First post by Timos, 13 years ago

    First post

    ---

    

    Hey everyone, how are you these days?
    
    As I mentioned on my last post (the 'how to...' one.. yeah, the one which PP got depressed ;) ) I'm planning a brew-rig for BIAB.
    
    So here's the details:
    
    The brew rig is planned to be as simple as possible, just like BIAB, a pot, a bag and a burner (and a brew-rig at some point :roll: ).
    
    I'm not getting into details regarding the burner and other stuff, as I want to complete the foundation first 100%.
    
    I'll glad to hear any opinions and ideas.
    
    These are...

    Last post

    ---

    

    hashie - Yep, you are right :). I never thought of it before but as I am in a ground floor apartment maybe I can start digging for more room? If I turn the music up full blast maybe no one will hear the jack-hammer? I'll have to give this some thought. Mmmmm.
    
    Timos - Will look forward to seeing your new plans. I was also really pleased to hear you have a girlfriend. If finances ever become tight and you have to choose between brewing and your girlfriend, it is far easier to get rid of a...
    10 Replies
    13278 Views
    Last post by PistolPatch
    13 years ago
24. Langco Urn

    6 Replies 10084 Views

    First post by Ralph, 14 years ago

    First post

    ---

    

    I scored this in a workshop equipment rationalisation effort today, a Langco UASSC/4 20L/ 4gal Electric Urn.
    
    Its been sitting around our shed gathering dust for about 10- 20 years, probably spent most of its life in a public service tea room. Problems:
    1) Sight gauge is buggered. No biggie, will block it up if need be.
    2) It is a bit manky, again no problem, some citric acid should shift all that:
    
    The lid looks all rusty in that shot, there is only some surface corrosion and nowhere as bad...

    Last post

    ---

    

    No BB, I'll never surrender!!! It is just for heating my stove- top sparge water! ;)
    
    Seriously, with this urn I'll be trying to replicate what I consider have been major successes in stove- top BIAB, this weekend looks quite promising. :)
    6 Replies
    10084 Views
    Last post by Ralph
    13 years ago